I have a bizarre problem. When I go to the speaker setup menus on my 1098, it will not allow me to pick the test tone item. I can get to any other area of the the setup but not the test tones. Any one have any idea what this means?
-
I calibrate my system (5.0 , all the same speaker except the center and no sub) here the result given with the internatl 1098 test tone :
FR:0
CENTER:-1
FL:0
SR:0
SL:5
What is very weird for me is the difference of 5 db between the 2... -
Hi,
It was suggested to me by one of my sources that the DSP EPROM update in the latest RSP-1098 firmware release (plus the native EPROM code in the RSP-1068 and RSX-1067) fixed the issue that many of us RSP-1098 owners had with the Sub level in the Test Tone menu being 10 dB too low... -
I have 1 question about the Test Tone on the centre channel.
When I use the SPL meter to calibrate my centre speaker using the internal pink noise from the 1066 at 75db, the centre is set at 0db.
But when I use the Test Tone from my DVD source pink noise like the "Video Essential"... -
Hi,
I just owned this receiver to replace with my old cheap one that I brought 5 year ago.
The setup was pretty smooth. I hooked up all 7 speakers which I used on the old receiver, when I tried to test them with test tone in the setting, I found out there is no test tone output... -
I've never really used the LFE output on my 1066 since I use Def Tech towers with built-in subs. With just the towers hooked up to L/R, the sound in movies is great and there's plenty of low frequency response. However, I thought I'd experiment and see how it performed differently if I used the optional...
Comment