Connectingproblem RSP1098 and RDV1060

[Marcel54]

I bought a new DLP TV so I connected my 1060 with component directly to my HD TV set (previously I used SCART). My 1060 is connected to the 1098 with composite for use of the TFT screen. Here's the problem: when I set my 1060 to progressive scan my TFT screen goes haywire (all I see is horizontal disturbance). Is there a way to solve this, other than connecting the 1060 to the 1098 with component and the TV with component to the 1098. I don't want to do that because of the expected loss of picture quality.

Thanks in advance for the input.

Marcel

[PewterTA]

Ok, here's a few things.

The problem I would think lies in the RDV-1060 and being able to produce a composite picture when the unit is set to a progressive signal. That's why the TFT is going nuts like that.

If you hook up the components to the 1098 and then to the DLP, it will not do anything for the TFT because it can only display composite (not component) signals.

Another thing is there should be no quality loss routing the signal through the 1098 as it has a high enough bandwidth to push HDTV signals through it. So anything your RDV-1060 would send should have no noticeable difference.