Hi all,
My 1095 seems to be buzzing more and more these days. I have verified that it's nothing to do with grounding. The buzzing is coming from the amplifier itself. I disconnected all interconnects except the speakers.
Here's what happens:
1. The amp powers on and the 5 red channel ligths come on for a second or two and then go off.
2. The amp is dead silent after the red channel ligths go out.
3. Over the next 5 - 10 seconds the amp begins to buzz softly and then increases in volume to a more audible buzz.
It sounds just like the buzz you hear in fluorescent lights. I have fluorescent lights but I have them all turned off. They are also on a seperate circuit and my entire home theater is on two dedicated 20 amp circuits.
My amp is the newer generation style with the clear binding posts. The hum can barely be heard from the listening area and only during silent parts or in between tracks. Sometimes the buzz is louder then other times. Could the variation in the volume of the buzz be related to voltage fluctuations?
My system is connected to two Richard Gray RPGC 400s.
Is anyone else with a 1095 experiencing this behavior?
My 1095 seems to be buzzing more and more these days. I have verified that it's nothing to do with grounding. The buzzing is coming from the amplifier itself. I disconnected all interconnects except the speakers.
Here's what happens:
1. The amp powers on and the 5 red channel ligths come on for a second or two and then go off.
2. The amp is dead silent after the red channel ligths go out.
3. Over the next 5 - 10 seconds the amp begins to buzz softly and then increases in volume to a more audible buzz.
It sounds just like the buzz you hear in fluorescent lights. I have fluorescent lights but I have them all turned off. They are also on a seperate circuit and my entire home theater is on two dedicated 20 amp circuits.
My amp is the newer generation style with the clear binding posts. The hum can barely be heard from the listening area and only during silent parts or in between tracks. Sometimes the buzz is louder then other times. Could the variation in the volume of the buzz be related to voltage fluctuations?
My system is connected to two Richard Gray RPGC 400s.
Is anyone else with a 1095 experiencing this behavior?
Comment