Wanted to see if this was normal. Manual says that is Zone 2 is on the standby light would flash when the unit is powered down. However, I have a RMB-1095 with the 12v trigger. I have found that when the second zone is on, the unit will not power down the amp. This makes no sense to me, since the Amp has nothing to do with the Second zone (well I guess it could, if you desired the trigger for the second zone, but under normal situations you would think that if you power down the unit to standby, that the attached AMP, would also be triggered to power down.
Anyone else out there experience this same behavior?
Anyone else out there experience this same behavior?