1055 remote question..

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • JDE
    Junior Member
    • Aug 2003
    • 5
    #1

    1055 remote question..

    Sorry for not remembering my remote #, but I assume only one model comes w/it..

    I used video II to learn my DVD players remote. Now when I press video II, it turns my DVD player on/off instead of changing the receiver to V2..

    I never programmed that button for power, but I did program the power button under the slider for it.

    Anyway is there something I missed? Even when I push Aud then Video 2 it doesn't select it..
    Tags: None
      • Bottom
    • Tha Freak
      Senior Member
      • Jul 2003
      • 385
      #2
      Well yes there is two remote depending when you bought...

      the RR-960 (I think) and the newer RR-1060...I got the newer since I bought mine a month ago.

      As for the remote, Rotel suggest that you use the 2nd page for customs programming...

      Your problem, is weird, and also, If I remember correctly, the V1 button is pre-programmed for DVD.

      But for the problem you state???...I have no clue, My guess is that you made the remote learn on V2 to turn off your player...




      - - - - - - - - - -

      "Are you gonna bark all day little doggy?...or are you gonna bite?
      -Mr. Blond in Reservoir Dogs
      - - - - - - - - - -

      "Are you gonna bark all day little doggy?...or are you gonna bite?
        • Bottom

        Comment

        • JDE
          Junior Member
          • Aug 2003
          • 5
          #3
          I have the new remote I think, just got it last week..

          Any clue how to reset it?
            • Bottom

            Comment

            • Tha Freak
              Senior Member
              • Jul 2003
              • 385
              #4
              Well there is a recet button under the slide panel, and I thing that if you hold it for a few seconds, it will recet to original setting...

              after, that, when you re-progtam it, switch into "page 2" so the original settings will always be available




              - - - - - - - - - -

              "Are you gonna bark all day little doggy?...or are you gonna bite?
              -Mr. Blond in Reservoir Dogs
              - - - - - - - - - -

              "Are you gonna bark all day little doggy?...or are you gonna bite?
                • Bottom

                Comment

                Previous template Next

                Related Topics

                Collapse
                • Glenn
                  Power button, settings, RSX-1055
                  by Glenn
                  I have temporarily set-up my new RSX-1055 to make sure all is working correctly. It has the latest firmware.

                  The current set-up is 2 channel. Just the basics for right now. I went into the set-up menu and changed the front main channels to "large". I set all the rest to "none"....
                  26 September 2003, 14:54 Friday
                • Poul
                  1055 - Stand-by Mode
                  by Poul
                  Since purchasing the 1055 I occasionally have problems powering up the unit from stand-by mode. Pressing the POWER button on the remote has no effect and only works after powering down and up using the button on the 1055.
                  Has anyone else experienced this problem?

                  Regards
                  ...
                  06 January 2003, 17:16 Monday
                • Andrew Pratt
                  RSP-1066 / RSX-1055 etc. Frequently Asked Questions (FAQ)
                  by Andrew Pratt
                  Rotel has a FAQ available here that may answer some of your questions. We've added several points of our own as well below.

                  1. How do I know what firmware is installed on my processor?
                  Answer: Simply press and hold the mute button on the remote and it will be displayd on the LCD...
                  15 April 2003, 14:08 Tuesday
                • jeffst
                  1055 Sluggish IR Response
                  by jeffst
                  I returned home from a 3 day trip and find that my new 1055 (v 2.24) is very slow to accept IR commands. i.e., the volume will not ramp when I hold down the volume UP/DOWN button. To change Video sources I often have to press a button 4 or 5 times. Control from the front panel of the receiver is fine....
                  25 April 2003, 20:24 Friday
                • spizzi
                  Serious help needed for my 1055! Thanks in advance!
                  by spizzi
                  :!:

                  I have the RSX-1055 and just noticed some very peculiar things:

                  1. I was playing a standard CD music track (not a burned CD) and had Dolby Prologic II format running on the Rotel. What I noticed was the sound would cut in and out on the rear surround speakers. IS...
                  13 January 2004, 11:22 Tuesday
                • Loading...
                • No more items.
                Working...
                  Searching...Please wait.
                  An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                  Please push the back button and reload the previous window.'
                  An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                  Please push the back button and reload the previous window.'
                  An internal error has occurred and the module cannot be displayed.
                  There are no results that meet this criteria.
                  Search Result for "|||"