Ok, here i am. I'VE FOUND A SOLUTION FOR THE INFAMOUS 1095 (and other amps) BUZZ/HUM!!!!!!!!!!!!!!!!
First of all get a cheated plug and connect the amp. Everything should be dead silent.
Second thing: get a normal plug and cut off the phase pins, just leave the ground pin ONLY. Now connect a cable to the ground pin of the plug, plug it into the wall, only the ground will plug, the 2 phase pins are not present.
Now just connect the wire to the amp chassis, wherewhere you want.
THAT'S IT! The amp is grounded (no risk of "electroshock!") and the buzz/hum is gone!
All the best,
Locutus2k
First of all get a cheated plug and connect the amp. Everything should be dead silent.
Second thing: get a normal plug and cut off the phase pins, just leave the ground pin ONLY. Now connect a cable to the ground pin of the plug, plug it into the wall, only the ground will plug, the 2 phase pins are not present.
Now just connect the wire to the amp chassis, wherewhere you want.
THAT'S IT! The amp is grounded (no risk of "electroshock!") and the buzz/hum is gone!
All the best,
Locutus2k
Comment