I've heard numerous reports of lip-sync issues with the Sharp XV-Z9000U projector. Some have suggested using devices to delay the audio signal to compensate for this. Does the RDC-7 have the capability to do this?
thanks,
Dan
thanks,
Dan
-
-
Yes, it does. Here is an exceprt from the Instruction Manual:
a. A/V Sync
If a digital signal processor is connected, there may be times when the audio and video from a DVD or LD player is not output in perfect sync. The result is where the sound and picture do not match and the sound is heard too early. In such a case, use this setting to properly synchronize the audio and video. This setting can be set between 0 to 30 ms in 0.5-ms increments. Under normal circumstances, this can left at 0 ms. For input
sources using the multi channel port, this setting will not appear.
What you DON'T say may be held against you... -
Wow! Thanks, Bruce. Now I'm really jazzed about this pre/pro. Hopefully the lip-sync issue with the Sharp Z9000 has just been blown out of proportion, but it's nice to know that I may be able to compensate should the problem show up in my system.
thanks,
DanComment
-
Sorry Burke! My fingers slipped and I typed Bruce.
Thanks again,
DanComment
-
Hiya,
I had a Rotel 1066 - 1075 and 985 mk11 and ended up selling them all and going for a stereo system.
Well a few months alter i'm bored again... fancy changing back the main thing that I was fedup with on the 1066 was the lack of delay to help lipsync. This annoyed... -
I'd decided on a RDC7.1 before learning it's a vapour product!
I'm currently using a Denon 5803A as a preamp but have been told to buy a dedicated preamp/processor with balanced outputs for better performance.
Do I buy a RDC7 or another product and if so what?
... -
Hi,
Does the Modula MT crossover compensate for the fact that the tweeter and the driver are radiating from different planes, i.e. are there delay networks inserted in the tweeter side of the crossover, and if so, can someone point that out to me?
Thanks,
Richard
... -
Is anyone using the Integra RDC7 with ROTEL AMPS? If so, how is this combination?15 March 2003, 14:55 Saturday -
Hello everyone this is my first post, and I just recently purchase a Integra RDC7 w/upgd 2, THX Ultra, and a CinePro 3KE Amp.I am in the process of setting everything up for the first time. I am not getting any audio when I connect to the DVD input using the RCA jack connection located in the DVD input...
Comment