Rotel Amp Protection

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • zork
    Junior Member
    • Jan 2010
    • 14
    #1

    Rotel Amp Protection

    hi
    got a rotel amp 1095 .i am running 802 d and htm2 d on it
    the lights there where one switch it on came on last night.
    only on the left and right and surround channels(i am bi amping)
    what does it do ?does it switch off or is it getting damaged?
    is it ok to run it like that?
    Tags: None
      • Bottom
    • windshear
      Senior Member
      • Dec 2004
      • 243
      #2
      Read your manual. You have a fault, either a short, on the wiring, you have over temped the amp or the amp on those channels is faulty.
        • Bottom

        Comment

        • mjb
          Super Senior Member
          • Mar 2005
          • 1485
          #3
          Originally posted by windshear
          Read your manual.
          Its here: http://www.rotel.com/content/manuals/rmb1095_multi.pdf :T
          - Mike

          Main System:
          B&W 802D, HTM2D, SCMS
          Classé SSP-800, CA-2200, CA-5100
            • Bottom

            Comment

            • BWLover
              Senior Member
              • Jan 2009
              • 552
              #4
              the only times ive encountered that is when the speaker wiring was wrong or strands of wire were touching eachother. or when its overheated. check your wiring makes sure the +/- is correct and turn it off then on (completely off via the big power button)
              Bowers & Wilkins 683 Speakers
              Rotel RB-1090 2 Channel Amp
              Rotel RC-1082 Stereo Pre Amp
              Rotel RCD-1072 CD Player
              Pro-Ject Debut Carbon w/ Ortofon 2M Red (sitting on a piece of slate supported by 3 "solid tech feet of silence" isolation feet)
              Rotel RLC-1040 Power Conditioner
              Shynyata Research SR-Z1 Power Outlet & Venom 3 Power Cords x 4
              Tara Labs RSC Vector 1 Speaker Cables & Interconnects
              Pioneer PDP-5070HD 50" Plasma
              Playstation 3
              Shaw HD PVR
              Primacoustic Room Treatments
                • Bottom

                Comment

                Previous template Next

                Related Topics

                Collapse
                • jolypg
                  Rotel 1095 circuit protection issue
                  by jolypg
                  I have a 1095 amp which trips the protection circuitry switch. Sometimes at low volumes, sometimes at high volumes.

                  I have sent the amp in to Rotel and they state it is ok.
                  I have moved speakers, wires, RCA connects to no avail.

                  There is no consistant manner as to...
                  19 October 2006, 13:15 Thursday
                • SRT-10 Viper
                  AMP Switch for OHMS?
                  by SRT-10 Viper
                  I am looking at a LAMM 1.2 Ref for my 800Ds. On the AMP it has a settings for 8 or 4 Ohm operation. The bias setting switch provides for class "A" operation with a speaker loads of either 4 or 8 Ohms. What switch should I use for 800Ds?

                  Thanks!

                  PS: Anyone try...
                  09 March 2007, 09:22 Friday
                • m1ke323
                  HK Receiver to Rotel 1080 Amp Help
                  by m1ke323
                  I just bought a Rotel 1080 to use for my tower speakers I am building. Previously I was just using my HK 225 receiver to power my speakers. I hooked up the amp with RCA cables from my HK receiver, I tried the Video 1 out, Video 2 out, Tape out, etc.

                  When I tried to use the amp to power...
                  19 August 2006, 17:37 Saturday
                • pchanj
                  Rotel RMB 1075 Protection light not working
                  by pchanj
                  Hi,
                  I was wondering whether someone has experienced anything like this. Just a few weeks ago, after watching a movie. I turned off my amplifier RMB 1075 and heard a loud pop. I cannot really tell if it came from the amp or speaker, but one thing I noticed though was that the protection light...
                  24 October 2015, 09:06 Saturday
                • Fargo
                  1095 Protection Activation @ Pre-Amp Pwr Down
                  by Fargo
                  I have a NEW 1095 connected to the Pre-Amp outs of a Sony STR-DA333ES and when I power down the pre-amp the 1095 Front L-R and Rear L-R channel protection circuits activate. The center channel does not. I then have to cycle the power amp on-off-on to reset the protection circuits. The 1095 is conected...
                  18 September 2005, 10:05 Sunday
                • Loading...
                • No more items.
                Working...
                  Searching...Please wait.
                  An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                  Please push the back button and reload the previous window.'
                  An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                  Please push the back button and reload the previous window.'
                  An internal error has occurred and the module cannot be displayed.
                  There are no results that meet this criteria.
                  Search Result for "|||"