Was thinking that it would be a good idea to use 3 HTM1D'S as the mains in a constant hight 2.35 front projection setup. I don't like acoustically transparent screens (oxymoron) and would never place speakers behind one (or use one). When using a 2.35 screen it could be almost as wide as the room while keeping the left and right at a closer to optimum angle by placing them under the screen like the center. You would also have a 100% timbre match.
Thoughts about using 3 HTM1D's across the fronts.
Collapse
This topic is closed.
X
X
-
Yup and a low sound image.
KalKal Rubinson
_______________________________
"Music in the Round"
Senior Contributing Editor, Stereophile
http://forum.stereophile.com/category/music-round- Bottom
-
My local B&W dealer has a setup like this... I think it sounds very good for HT. I haven't spent time with it on 2 CH.- Bottom
Comment
-
Originally posted by Kal RubinsonYup and a low sound image.
Kal- Bottom
Comment
-
Originally posted by chinetsSound stage will be toooooooooooooo low M8 !!
You need floor standers for L&R front to get exquisite HT ( That is my honest opinion) ,as I am reallly into 5.1 and 7.1 Multichannel and HT!!
I would ask B&W this question !!
Cheers- Bottom
Comment
-
Originally posted by WilliamSo what about the center sound stage being too low M9?
KalKal Rubinson
_______________________________
"Music in the Round"
Senior Contributing Editor, Stereophile
http://forum.stereophile.com/category/music-round- Bottom
Comment
-
M8 stands for mate !!
Anyway, You will be loosing valuable sound ,as center speaker perform differently than floor standers ,and will sound differently ,asfor Music on DVD or SACD or DVD-A the sound will be very low and less full and the sound stage will sound very small and the highs will not be as dispursed as you would want. Now, if you really have a serious problem because of space ,and have to do it that way by hook or by crook, then better 3 HTM1D than Bose.. Right ?? But to get a fuller and larger stage ,you would be better of placing 2 floorstanders preferably 802Ds on the sides of your screen and 1 HTM1D in the center ,and you'll get a better sound and a better picture sound stage !! That is IMHO (in my honest opinion) just In case :rofl: M9!!
Cheers and Good Luck !!- Bottom
Comment
Comment