Subwoofer Timing

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • rickp15
    Junior Member
    • Aug 2008
    • 17
    #1

    Subwoofer Timing

    Can someone explain to me the proper procedure for timing subwoofers. I have a IB in the center front (horizontal array) with FBQ and 2 subs one in each rear corner, they are running through the other channel on the FBQ. I can actually hear the delay.

    Thanks
    Tags: None
      • Bottom
    • Chris D
      Ultra Senior Member
      • Dec 2000
      • 16875
      #2
      Depends on your setup. Do you have the ability to set individual distances/delays for different subs? Would depend on your receiver/processor, as well as whatever else you have in the subwoofer path along the way.

      We discussed this issue this past week in another thread here about 7.2/9.2 receivers.
      CHRIS

      Well, we're safe for now. Thank goodness we're in a bowling alley.
      - Pleasantville
        • Bottom

        Comment

        • rickp15
          Junior Member
          • Aug 2008
          • 17
          #3
          Problem solved, I ran the rear sub line through a DCX channel I wasn't using then on to the FBQ, cranked in about 7.?ms of delay and whala tight bass, NICE!
            • Bottom

            Comment

            Previous template Next

            Related Topics

            Collapse
            • kgveteran
              Using TrueRta to adjust subwoofer delay
              by kgveteran
              How would I adjust the delay for my subs on my processor to match the mains of my HT ? There has been talk of this on other forums.

              Most of the talk is that there is a problem with the subwoofer delay and that the numbers don't coinside.Your thoughts.
              20 February 2006, 20:15 Monday
            • ro9397
              Sub: sonotube, siting, EQ, delay?
              by ro9397
              Questions concern siting & enclosure material for a custom sub for a very high-end music reproduction system. Sub source is a mono signal from a proprietary pure-analog processor. Will start w/ one sub; depending on results may add a second sub.

              Room Dimensions & Volume
              ...
              03 February 2007, 01:28 Saturday
            • Andrew Pratt
              How many subs is enough?
              by Andrew Pratt
              How Many Subwoofers Is Enough?

              Floyd Toole and Todd Welti may surprise you with their answer.

              In previous columns on subwoofer placement, we’ve discussed the conventional wisdom of adding the ".1" to 5.1-, 6.1-, and 7.1-channel surround sound. That wisdom pretty...
              02 November 2004, 14:25 Tuesday
            • technodanvan
              A subwoofer journey...(CSS SDX12 + 3x APR12 Passive Radiators)
              by technodanvan
              As far as build stories go, this one will probably not yield much fruit for a little bit. That said, I have some questions for the community regarding subwoofer design before making any further purchases. I already have 4x Dayton UM15-22 subwoofers expected this Saturday for another application...I'm...
              05 January 2023, 12:50 Thursday
            • Dmantis
              M&K MX-125 Mark II Subwoofer
              by Dmantis
              What's up everyone?
              I recently aquired a used M&K sub woofer. It had a bad Phase switch which was causing it to pop. The person I got it from didn't want to get it fixed and decided to get a new woofer.
              I took this subwoofer home, fixed the Switch and decided to add it into my system...
              16 November 2013, 07:50 Saturday
            • Loading...
            • No more items.
            Working...
              Searching...Please wait.
              An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

              Please push the back button and reload the previous window.'
              An unexpected error was returned: 'Your submission could not be processed because the token has expired.

              Please push the back button and reload the previous window.'
              An internal error has occurred and the module cannot be displayed.
              There are no results that meet this criteria.
              Search Result for "|||"