Separates or single AVR?

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • macdon
    Junior Member
    • Jan 2008
    • 6

    #1

    Separates or single AVR?

    I recently finished a very simple audio setup in our bedroom composed of B&W 602s3 speakers, Rotel Ra-01 integrated amp and Rotel RCD-1072 cd player. I must say that I'm enjoying it

    I'm now slowly embarking on a HT install for our TV room. Got most of the equipment except for the AVR. I'll be using B&W 601s3 fronts & LCR60s3 center with Wharfedale WH3 surrounds. The TV room is about 16 -20sqm with one side/wall extending to the living room. Main seating area is approx 7' away from front speakers.

    What I cant decide on is whether I would use an AVR or go separates (Processor + power amp)?
    Just recently, I was offered a pre-owned Rotel RSP-1066 - which made me think if I would go separates or not.

    While I do believe that going separates have a sonic improvement over an AVR, but then again going separates is 3x more expensive than a single AVR.

    Any inputs and advice would be greatly appreciated
  • georgev
    Senior Member
    • Jul 2004
    • 365

    #2
    With the setup that you are planning(i.e. the speakers), a decent avr would be more than adequate. The new Onkyos are great and decent value, so are the yammies and the Denon's. You would also want one that has HDMI inputs.
    The power sections of those would drive the speakers very well, and I don't think there would be any sonic benefits in going the separate route.
    Going for larger more power hungry speakers would then beging to require better quality power that the separate routes would offer.
    Again, if your AVR has pre outs, you could later add a power amp and use the AVR as a pre. Think also in the long term, you ARE going to upgrade(matter of time and when).
    Hope that helps.
    George.

    Comment

    • Azeke
      Super Senior Member
      • Mar 2003
      • 2123

      #3
      I concur, with George, just purchase a AV receiver that is at least HDMI 1.3a compliant, and upgrade later if you wish. I initially utilized a Yami receiver, then purchased new speakers, then purchased power amps powered through the Yami pre-outs, then eventually purchased a pre-pro. I used the Yami AV as a secondary equipment piece. It was definitely worth the upgrade for me, but I did it in phases.

      Peace and blessings,

      Azeke

      Comment

      Related Topics

      Collapse

      Working...
        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"