I have a Rotel RSP-1068 wich has only 1 component output. I would like to use my Phillips RDV-985 to record from my Denon DVD and my Samsung STB. The problem is my 1068 will not output component sources to an s-video output. Do I change everything over to an s-video input into the 1068 so it will accomplish what I am after, or try and find a component video splitter to send the switched output from the 1068 to both my HD monitor and Phillips recorder? I want the best possible signal obviously, would the s-video route really be a step down from component, would 1 component output be able to drive to inputs via splitter w/o signal loss? Thanks in advance, Bob
-
G'day,
I'm having problems with the component input/output of my RSP-1068.
I finally bought a TV that has component input. I connected my set-top box to the TV via component, and got a great image without any problems after one hour of use. Next I connected the DVD player... -
Hello everyone
I'm looking for a new home theatre receiver and I was wondering if the RSX-1056 sends the OSD and upconverts the SVGA and Video inputs so that
they can be viewed with just the component video output connected to
the TV. Also can anyone comment on how easy... -
Hi All,
I just upgraded to a 1068 a while back and had an issue that I hoped someone in the forum could answer. I have a Pioneer DVL-91 combo DVD/LD player which I wanted to connect via component video only. When I play a DVD everything is OK. When I play a LaserDisc the DVL-91 shuts off the... -
Hello all,
I have a Yamaha RXV1000 reciever which I moved into a server rack in my basement with all my other components and is no longer visible or easily acessible. Its an older unit without hdmi, only composite, s-vid and component output. I have it connected to a new toshiba... -
I'm very happy with my Parasound setup though it looks like my C2 will never support HDMI fully. I use a combination of my C2 and TV for video switching along with the MX-700 macros. So I really have no need for a Parasound HDMI switch only device, since it will do nothing to help with OSD.
...