Our notebook has only analog output.The suitable cable for connecting our notebook to the receiver is "stereo Rca" I think.The problem is,I think this cable has two edges at both sides but the notebook has only 1 audio connector?
Suitable cable for connecting notebook to receiver?
Collapse
This topic is closed.
X
X
-
Usually a stereo minijack at one end, splitting out to dual RCA at the other, like this:
Find one at the level of cable quality you prefer.- Bottom
-
-
I would recommend getting an apple airport express (even a used one for cheap).
plug the airport express into an outlet near your receiver and get an optical cable to feed your receiver. Control the airport from itunes on your laptop.
Believe it or not, the airport express is bit-perfect so you'll have no quality loss whatsoever. If you want even better quality you can buy an external dac like the musical fidelity V-DAC an put that inline and now you have the quality of a $1000+ CD player.
The whole project should cost $50-$70 at most. (before external DAC)
so you need:
used airport express:
http://cgi.ebay.com/APPLE-AIRPORT-EX...item3357bf2e0f
this optical cable:
http://www.monoprice.com/products/pr...seq=1&format=2
optional DAC like:
Marantz SR5002 (music fed by apple airport express via optical)
rotel RB-985 THX (4 channels bipowering fronts, 1 for the center)
B&W - 683, CDM-CNT, CDS3 (sides), DM601 (rears)
a combo of haveflex and audioquest cables.- Bottom
Comment
-
are you serious, why are you even on this forum? an analog cable from a computer will always suck due to all the noise introduced from a computer.
pick an apple product or some other brand, but make sure you're coming out digital from your computer.Marantz SR5002 (music fed by apple airport express via optical)
rotel RB-985 THX (4 channels bipowering fronts, 1 for the center)
B&W - 683, CDM-CNT, CDS3 (sides), DM601 (rears)
a combo of haveflex and audioquest cables.- Bottom
Comment
-
If it's not too much, if your receiver has an optical input, you can also pick up a small usb sound card that can output optical or coax. The Turtle Beach Micro is like $20-30. Optical cable is like $10. You can set it to output optical, connect it to your receiver, and have a much better setup.B&W 804S/Velodyne SPL-1000R/Anthem MRX720- Bottom
Comment
Related Topics
Collapse
-
Designed to provide maximum performance and a rich visual experience, the Dell InspironTM 9100 notebook is a powerful multimedia computer that can replace your desktop multimedia system. Because of a powerful IntelĀ® PentiumĀ® 4 processor with Hyper-Threading technology and the dazzling... -
by cyberspyderNot sure which section to put this in....but it pertains to audio, so meh.
I currently have the following: Pioneer DV-515 DVD player, a cheap ass Magnasonic player for those pirated DVDs, a HTPC, a Pioneer Laserdisc/VCD player, a VCR and a NEC AV-300PRO receiver. What I want to do is...-
Channel: AV Chalet and Home Theater Hangout
-
-
by sskimThis question involves connecting cable coax cable. My setup is Pioneer Plasma with cable card and Cablevision is the provider. I have coax cable running to "IN" of RLC1040's "surge protected" coax connector and using a second coax cable to connect the plasma to "OUT"...-
Channel: Club Rotel
-
-
by G12345567My setup is as follows.
Amplifier: Marantz SR5200
Centre: LCR60
Front L & R: 602s3
Rears L & R: 601s3
and a 3rd party sub (rca connected)
at the moment the fronts and centre are bi-wired using the following grade cable.
...-
Channel: Club B & W Speakers
-
-
by mwgwinHas anyone had trouble connecting their PC through their receiver?
Here is my setup
PC with ATI Radeon 9600 Pro video card with DVI and VGA outputs.
Yamaha RX-V1600 with 2 HDMI inputs and 1 HDMI output
Dell 5100MP projector with about one of each type of input imaginable....-
Channel: AV Chalet and Home Theater Hangout
-
- Loading...
- No more items.

Comment