Where to buy 3.5mm cables?

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • riceaterslc
    Senior Member
    • Aug 2006
    • 205

    #1

    Where to buy 3.5mm cables?

    if this is in the wrong forum, i apologize. not exactly sure where to post it.

    i need some 3.5mm mono M/M 6" cables, and i cannot find them anywhere. i need them to daisy chain my mono amps 12v trigger. the shortest ones i can find are 8" ones but they are like $10 each and stereo. anyone have any recommendations? thanks in advance!
    chris
  • dyazdani
    Ultra Senior Member
    • Oct 2005
    • 7032

    #2
    I was going to say CAT, but for audio signal cables. I would just go DIY for a 12v trigger.
    Danish

    Comment

    • audioqueso
      Super Senior Member
      • Nov 2004
      • 1933

      #3
      B&W 804S/Velodyne SPL-1000R/Anthem MRX720

      Comment

      • riceaterslc
        Senior Member
        • Aug 2006
        • 205

        #4
        thanks for the link audioqueso but $10 for 8" is a bit pricey for me. DIY it is!
        chris

        Comment

        • Kevin P
          Ultra Senior Member
          • Aug 2000
          • 10812

          #5
          I was about to say RadioShack, but I don't know that there are any in Korea. Maybe a local electronics shop?

          Comment

          • riceaterslc
            Senior Member
            • Aug 2006
            • 205

            #6
            Originally posted by Kevin P
            I was about to say RadioShack, but I don't know that there are any in Korea. Maybe a local electronics shop?
            yeah, i looked on radioshack's website and they didnt have anything short either. i was thinking about asking my wife, who is still back in the states, to go looking for me but knowing the quality of the salespeople in our area, and her not really knowing what to get i would probably end up with 1000ft of cat5e or something electronic shops here are hit or miss, no luck yet...
            chris

            Comment

            • Kevin D
              Ultra Senior Member
              • Oct 2002
              • 4601

              #7
              FWIW, stereo ones would work fine if they're easier to get.

              Kevin D.

              Comment

              Related Topics

              Collapse

              • kevinm
                Adding 12v Trigger and silent fans to iNuke 6000DSP (along with other sweets mods)
                by kevinm
                Hi all,

                I almost posted this in my other thread, but thought maybe it could use its own. A few weeks ago I picked up an iNuke 6000DSP to run my LFE channel. These amps are amazing to run subs. The extra headroom for my drivers has added a very audible benefit to my system - and the DSP...
                25 December 2014, 23:06 Thursday
              • ck44rotel
                12V trigger?
                by ck44rotel
                I've been wanting to use the 12V trigger on my RSX 1055 to turn my RCD 1070 on. So I went to Radio Shack this past weekend looking for the "3.5 mm Mono to Mono" cable and came away empty handed. I want to make sure I'm looking for the right cable because Radio Shack sizes everything in inches....
                15 July 2003, 07:59 Tuesday
              • misterdoggy
                12v trigger can I use a stereo cable 3.5mm 1/8
                by misterdoggy
                I read in a few threads that some people said you can use a 1/8 3.5mm stereo jack instead of a mono, cable as a 12v trigger. Is this true or will I blow up my Krells as I haven't found a mono 3.5 cable yet here in France
                19 June 2005, 13:36 Sunday
              • adrian carreon
                12v trigger question...
                by adrian carreon
                Hello guys,

                I've been searching this kind of question regarding on 12v trigger it seems that most of the topics is about RB-1080 and getting some problem like bad fuses, L&R ch not working due to resistor, caps and etc. Just wondering if there's anyone here encounter same problem...
                01 May 2006, 18:24 Monday
              • blunt
                1068/1075 12v trigger problems.
                by blunt
                i have hooked them up using a mono 3.5 mini jack lead and as soon as i turn on the switch on the back of the 75 i cant get any sound,i just cant seem to get the 12v trigger to work,i know i am doing something wrong... ops:
                25 July 2004, 08:42 Sunday
              • Loading...
              • No more items.
              Working...
                Searching...Please wait.
                An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                Please push the back button and reload the previous window.'
                An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                Please push the back button and reload the previous window.'
                An internal error has occurred and the module cannot be displayed.
                There are no results that meet this criteria.
                Search Result for "|||"