Hey guys.
It's been about 4-5 years since I built my Statement II speakers. They've been excellent, though my craftsmanship has developed, and I'd like to rebuild them in a slightly more aesthetically pleasing manner.
I attached a couple of photos of my CAD drawings. I've planned out how to do this with the CNC, I just want to check and discuss whether what I've proposed is reasonable, and wont impact dynamics too much.
I intend to 3d print the channels for the mids, rather than use MDF. (this is why they are not included in the CAD drawings). It seems less complicated. I could make the mid tunnels round, or square as originally done.
I increased the cabinet width by 1" at the woofers, and decreased it by 1" at the MTM.
I haven't been able to calculate cabinet volume (likely due to some of my own weaknesses with Fusion 360). I left the depth the same. The height of the tweeter, and position of the mids to the tweeter is the same. I'd guess a 30-40% volume reduction, though hard to say. There's no port shown. I could go either way. No port, and add a sub. Or, port, and... probably add a sub anyway.
Any input is appreciated.
It's been about 4-5 years since I built my Statement II speakers. They've been excellent, though my craftsmanship has developed, and I'd like to rebuild them in a slightly more aesthetically pleasing manner.
I attached a couple of photos of my CAD drawings. I've planned out how to do this with the CNC, I just want to check and discuss whether what I've proposed is reasonable, and wont impact dynamics too much.
I intend to 3d print the channels for the mids, rather than use MDF. (this is why they are not included in the CAD drawings). It seems less complicated. I could make the mid tunnels round, or square as originally done.
I increased the cabinet width by 1" at the woofers, and decreased it by 1" at the MTM.
I haven't been able to calculate cabinet volume (likely due to some of my own weaknesses with Fusion 360). I left the depth the same. The height of the tweeter, and position of the mids to the tweeter is the same. I'd guess a 30-40% volume reduction, though hard to say. There's no port shown. I could go either way. No port, and add a sub. Or, port, and... probably add a sub anyway.
Any input is appreciated.
Comment