Well my PC will not start windows for some reason. This morning as I was posting on TTP I tried to run some app by clicking on the task bar. It did not launch and basically seemed like a dead task bar.
Eventually some error message came up saying it was not a vvalid blah, blah, blah 32$#%&* app, or something like that. I clciked on the app again and then after some time it stated the application cannot be found or has been moved.. I looked at the drive it was on and it was not there in File explorer. Which is weird for the other partion of the drive was there. It's the Western Digital drive that has 2 partions, yet only one was visiable.
I decided to restart the system and it held the splash screen forever which was strange, for usually this is faster than a blink of an eye. Anyway WinXP started it's load screen and just when it gets to the point where the Welcome screen should up, the PC just sits there with a blank screen.. Nothing... Monitors show it's still getting a signal, but the screens are black.
So I reboot and go into the bios to have a quick look, the Primary IDE channels are not showing the drives... I check all the cables to make sure they are tight, and as I'm adjusting, all the drives (I think) start making some kind of clunking sound.. I let the system run the boot coarse and leave for work.. I tell Christine if the welcome screen does not comeup after 1.2 hour shut it down... Well she shut it down.
So I'll be looking into that tonight. It seems somthing is hanging the start of windows and it may be the drives on the IDE channel 1. The OS is loaded on the RAID array and it seems it wants to boot, start and run, but something is tripping it up just after windows loads.
I'll have to try Safe mode tonight.
Guess I may be installing that new Mobo and CPU sooner than I thought
I didn't have a lot of time to troubleshoot this, but I look forward to any ideas anyone may have.
Thanks!
Bing
Eventually some error message came up saying it was not a vvalid blah, blah, blah 32$#%&* app, or something like that. I clciked on the app again and then after some time it stated the application cannot be found or has been moved.. I looked at the drive it was on and it was not there in File explorer. Which is weird for the other partion of the drive was there. It's the Western Digital drive that has 2 partions, yet only one was visiable.
I decided to restart the system and it held the splash screen forever which was strange, for usually this is faster than a blink of an eye. Anyway WinXP started it's load screen and just when it gets to the point where the Welcome screen should up, the PC just sits there with a blank screen.. Nothing... Monitors show it's still getting a signal, but the screens are black.
So I reboot and go into the bios to have a quick look, the Primary IDE channels are not showing the drives... I check all the cables to make sure they are tight, and as I'm adjusting, all the drives (I think) start making some kind of clunking sound.. I let the system run the boot coarse and leave for work.. I tell Christine if the welcome screen does not comeup after 1.2 hour shut it down... Well she shut it down.
So I'll be looking into that tonight. It seems somthing is hanging the start of windows and it may be the drives on the IDE channel 1. The OS is loaded on the RAID array and it seems it wants to boot, start and run, but something is tripping it up just after windows loads.
I'll have to try Safe mode tonight.
Guess I may be installing that new Mobo and CPU sooner than I thought
I didn't have a lot of time to troubleshoot this, but I look forward to any ideas anyone may have.
Thanks!
Bing
Comment