I need a signal sensing power strip, not a current sensing one......anyone know of one...
-
Here is my LCR "Trio". Way to go guys ! -
Niles Audio
I used to use one of these to trigger a Rotel amp that did not have a trigger in it.
I cut off the end of a 3.5mm mini cable and pluged it in. Worked well.
Hope this helps. -
Doesn't the Monster HT series have "switched" outlets that are triggered with s 12v trigger?
I'm pretty sure my old HT2000mkii power strip had this feature. I just never used it.Panasonic TC-P65VT30
Onkyo Pro PR-SC5508 | M2Tech Young DAC | Emotiva XPA-1 (x3), XPA-2
Oppo BDP-93 | DirecTV HR23-700 HD-DVR | Pioneer PL-670 Turntable
Sony Playstation 3 | Nintendo Wii | Apple TV 2, Mac Mini (iTunes Server), iPad
B&W 804S, HTM3S, CWM DS8 | SVS PB12-NSD | Denon AH-D2000 Headphones
Tripp Lite HT1210ISOCTR Power Conditioner, SMART1000LCD UPS System
My Bowers & Wilkins 800 Series Setup
Next Upgrade: CablesComment
-
Man, there sure seems to be some confusion on this topic, reading through history. Anyway, my situtation is unique and I'm looking for any suggestions on a solution. I recently came home with a brand new RSP-1068 to replace my aged Marantz AV600/DP870 combo. Stopped at Radio Shack on the ride home... -
HI All,
I am a recent HT owner with all new equipment. While I was setting things up, I ran into something I had never seen before: TRIGGERS. None of my manuals gave more than passing mention so I ignored them for a while. At several Radio Shack's I asked for an HT Trigger cable and they had... -
I know there have been several threads on 12v trigger issues, so I hope you will indulge me. I have an Onkyo receiver with pre-outs and 12v triggers for 2 additional zones. I am using an old 5-channel receiver to power those 2 zones, and have dedicated 2 channels per zone. The old received lacks a 12v... -
Got a rb976mkII and the auto-sensing is great to use for the surrounds so it powers up when any surround material is played. Worked great until I decreased the volume to a bit quieter. Sometimes it switches off then straight back on again or I have to turn up the volume. Is this normal? I thought it... -
I have some cooling fans that I'd like to turn on when I turn on my pre/pro.
Do any of you know of a power strip that can turn power to its outlets on by using a 12v trigger?
Thanks in advance.
Comment