Anyone know how to build your own?
-
-
IB subwoofer FAQ page
"Complicated equipment and light reflectors and various other items of hardware are enough, to my mind, to prevent the birdie from coming out." ...... Henri Cartier-Bresson -
Ummm... any reason for DIY instead of using Xantech's receiver? Mine works great. Not free, but not overly expensive.
CHRIS
Well, we're safe for now. Thank goodness we're in a bowling alley.
- PleasantvilleComment
-
I have a Yamaha 2500 receiver in my 5.1 HT. I just turned it on and I have sound out of the fronts, center and base. No sound out of the rears however. I think the volume is just turned down on this channel.
The way I have my system set up, I do not have any video pumping through the... -
While I am listening to the radio(on internet) broadcasting,I want to record the broadcasting as files on computer.Receiver is connected via Digital Optical Out to the computer.The problem is,when the audio setting on computer is set as "Realtek Digital Output",I am not able to record the...17 January 2010, 16:57 Sunday -
Greetings again,
I just picked up a Xantech Hidden Link IR kit, and it works flawlessly...
However one peice of perfection yet evades me, I need to know what is done when you require a AV receiver that has an IR input jack to connect to a Xantech connecting block (IR manifold)?... -
hi all, I have some questions regarding xantech that I am hoping someone can help with
1. can I plug a xantech ir receiver directly into the main ir input on my c2?
2. can I plug a 3.5mm jack (mono?) between the zone 2 ir input on my c2 and a xantech CB20. I want to... -
I'm not having any luck getting my Xantech IR repeaters and emitters to work with my RSP1066. I currently have an entire Xantech distribution system and everything works fine. When plugged into the 1066, the receiver doesn't even flash to indicate a signal is being received. The Rotel manual names Xantech...
Comment