Hello All,
I just bought an OPPO BDP-83 and have a Sharp AQUOS which according to the specs on the website is HDMI 1.2a. I looked to see if it supports deep colour and 36 bits but did not find the info. The Wiki of HDMI says the following:
So i have to assume that my LCD only does 24 bit. And finally the question:
What setting should I set the OPPO in video settings, the easy answer is 24 bit but what about the dithering settings, will they be better? If yes what do they do?
Thanks
Luca
I just bought an OPPO BDP-83 and have a Sharp AQUOS which according to the specs on the website is HDMI 1.2a. I looked to see if it supports deep colour and 36 bits but did not find the info. The Wiki of HDMI says the following:
HDMI 1.3 was released June 22, 2006 and increased the single-link bandwidth to 340 MHz (10.2 Gbit/s). It optionally supports Deep Color, with 30-bit, 36-bit, and 48-bit xvYCC, sRGB, or YCbCr, compared to 24-bit sRGB or YCbCr in previous HDMI versions
What setting should I set the OPPO in video settings, the easy answer is 24 bit but what about the dithering settings, will they be better? If yes what do they do?
Thanks
Luca
Comment