Exploring Common DIY Terminology - Damping Factor

Damping Factor

The damping factor is a measure of the amplifier's ability to control the movement of a loudspeaker's voice coil and bring it to a stop after the audio signal has stopped. It quantifies an amplifier's ability to provide an electrical damping effect on the speaker. Mathematically, the damping factor is defined as the ratio of the loudspeaker's nominal impedance (typically 4 or 8 ohms) to the output impedance of the amplifier. It is usually expressed as a number, such as...

Gap Height

Gap height refers to the vertical dimension of the air gap between the magnetic pole piece and the voice coil. It is a critical parameter that affects the performance and characteristics of the loudspeaker driver. The gap height has a direct impact on several aspects of the loudspeaker driver's operation:

• Voice Coil Clearance: The gap height determines the clearance or distance between the voice coil and the pole piece. Sufficient clearance is essential to prevent any physical

...

Underhung Voice Coil

An underhung driver is a type of design where the voice coil's winding height is shorter than the height of the magnetic gap in which it operates. In other words, the coil does not extend fully through the magnetic gap, and it remains "underhung" within the magnetic structure. In a standard loudspeaker driver, the voice coil is wound on a cylindrical former and moves within the magnetic gap, which is a cylindrical space between the pole piece and the magnetic...

Compression Driver

A compression driver is a type of loudspeaker driver used primarily in high-frequency reproduction. It is commonly found in professional audio applications, such as PA (Public Address) systems, studio monitors, and high-end home audio speakers. The compression driver is designed to handle the high frequencies efficiently and deliver them with clarity and power. A compression driver consists of several key components:

• Diaphragm: The diaphragm in a compression driver

...

Soundstage

Soundstage refers to the perceived spatial placement and localization of sound sources in a recording. It describes the three-dimensional presentation of audio, making it seem as if the sound is originating from specific locations within the listening environment, rather than coming directly from the loudspeakers. When a recording and playback system is capable of creating a convincing soundstage, listeners can experience a more immersive and realistic audio experience. The...

Cms (Thiele/Small Parameter)

Cms refers to the mechanical compliance of a driver's suspension system. Cms represents the stiffness or flexibility of the driver's surround and spider, which are responsible for centering and controlling the motion of the driver's diaphragm. It quantifies the ability of the suspension to move in response to changes in force.

The compliance of the suspension affects the resonant frequency, low-frequency response, and overall behavior of the...

Re (Thiele/Small Parameter)

Re refers to the DC resistance of the driver. It represents the electrical resistance encountered by the audio signal as it passes through the voice coil. This has important implications in loudspeaker design:

• Power handling: Re affects the power handling capabilities of the loudspeaker. As the audio signal passes through the voice coil, it encounters electrical resistance, causing a voltage drop and generating heat. A lower resistance value (lower Re)

...

Decibel (dB)

The decibel (dB) is a unit of measurement used to quantify the level or intensity of sound. In the context of loudspeaker audio, the decibel is used to express the sound pressure level (SPL) or the power level of audio signals. The decibel scale is used to measure and compare sound pressure levels. It helps in determining the efficiency, output capability, and distortion characteristics of loudspeakers, as well as assessing their suitability for different applications....

Harmonic Distortion

Harmonic distortion refers to the presence of additional frequency components in the output audio that are multiples (harmonics) of the input signal frequency. It occurs when a loudspeaker driver introduces unintended changes to the original signal, resulting in the generation of harmonic frequencies that were not present in the source material. Harmonic distortion can degrade sound quality, introduce coloration, and affect the accuracy of sound reproduction. There...

Overhung Voice Coil

An overhung voice coil is a type of loudspeaker driver design where the winding height of the voice coil is longer than the height of the magnetic gap in which it operates. In this design, the coil extends beyond the magnetic gap, giving it a longer excursion capability than a standard driver.

Pros of Overhung Voice Coils:

• Greater Excursion Capability: Overhung voice coils have a longer excursion range, allowing them to move the speaker cone farther

...