VituixCAD Process
Connect each driver and EQ blocks in the crossover section as shown. Ensure that the active peak/notch filters are “shorted” so that only the G(f) block is directly connected to the driver. Three PEQ blocks are show,...
2 results in 0.0214 seconds.
-
How To: Mirror EQ with VituixCAD
-
Created by:
Reet
How To: Mirror EQ with VituixCAD
With VituixCAD, we have the ability to provide a mirror EQ function, that can then be passed to APO EQ for active processing. This allows for a speaker's frequency response to be fully compensated for without requiring many bands of parametric EQ.
VituixCAD Process
Connect each driver and EQ blocks in the crossover section as shown. Ensure that the active peak/notch filters are “shorted” so that only the G(f) block is directly connected to the driver. Three PEQ blocks are show,...Last edited by Reet; 29 December 2022, 15:12 Thursday. -
Created by:
-
How To: Filter Simulation with VituixCAD and EQ APO
With meticulous passive filter design, it may be beneficial to hear the result before spending money on crossover parts and putting in the time to assemble the crossover. Fortunately, with VituixCAD and EQ APO and filter can be simulated digitally. This process can simulate multiple drivers simultaneously, one driver for each output on a soundcard, for example a 7.1 soundcard could simulate a stereo 3 way system utilizing 6 channels.
Note that an emulated passive filter will reproduce...Last edited by Reet; 29 December 2022, 15:13 Thursday.