1080 And 1095

[KEN KAZ]

I am setting up a 1080 and 1095 in a 7 channel suround set up.

should i use the 1080 for the front main or the rear surround?

thanks

kaz

[ajpoe]

1080 for front mains. u can probably just set that one amp to kick on for 2 channel music and the 1095 on top of that for non 2 channel. Generally a 2 channel amp is going to produce higher quality 2 channel than a 5 channel amp, too.

AJ

[Azeke]

I am setting up a 1080 and 1095 in a 7 channel suround set up.

should i use the 1080 for the front main or the rear surround?

thanks

kaz

Indeed, RB-1080 for the fronts and the RMB-1095 for the rears.

I am currently running 7.1 with DoProIIx software and it's beautiful :T .

Good luck.

Regards,

Azeke

[Bing Fung]

Apperently you should use the 1080 for the Mains, and the 1095 for everything else, However it wouldn't hurt to experiment and see if you notice a difference.

[jlee]

I would try it both ways and see what you like better. I compared the 1080 to the 1095 in pure 2 channel. 1080 did some things better, but 1095 did some things better as well... notably, that in pure 2 channel, 1095 actually puts out about 280W per channel and therefore had more headroom and dynamics. They are actually VERY VERY close... the 1095 basically gives you 2.5 1080's for the price of 2.