Rotel rsp-1068 buzzing sound...Heelp pleeease

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Micke.H
    Member
    • Sep 2004
    • 34
    #1

    Rotel rsp-1068 buzzing sound...Heelp pleeease

    Hi .
    I just bought a Rotel rsp-1068 and iam disturbed by the buzz/noise the 1068 does at low volyme the noise is quite loud ..too loud for me and i wounder if anyone else is having the same problem??
    I have tryed to change powercord and diffrent settings "bypass "and all but the noise is still there :cry: PLEASE HEELP ME.
    By the way, im from Sweden so my English is so so.Thanks anyway.
    Tags: None
      • Bottom
    • Azeke
      Super Senior Member
      • Mar 2003
      • 2123
      #2
      Welcome.

      Quick thoughts.

      1) If you have cable, disconnect to see if that stops the noise (this seems to solve at least 90% of issues).

      2) If not you will have to disconnect your equipment, and reconnect each component (including amps), until you find the culprit.

      Good Luck.

      Regards,

      Azeke
        • Bottom

        Comment

        • aud19
          Twin Moderator Emeritus
          • Aug 2003
          • 16706
          #3
          Yup, sounds like an another ground loop hum. Likely Cable or satellite feed as Azeke pointed out. If not follow his instructions and unplug everything, plugging back one thing at a time to narrow it down.

          Jason
          Jason
            • Bottom

            Comment

            • Micke.H
              Member
              • Sep 2004
              • 34
              #4
              oki. i will try thath but i have no cabel and it did not buzz with rotel rsv-976..
              but i will report if it helped..
              thanks for now .
                • Bottom

                Comment

                • Micke.H
                  Member
                  • Sep 2004
                  • 34
                  #5
                  Ohh Yeaahh no mr buzz im my speakers
                  It was the osd cable to my Sony tv ..there you go..
                  problem solved ,thanks for the input.
                  And the soundquality in 2 channel with bypass is unbeliveble
                    • Bottom

                    Comment

                    • aud19
                      Twin Moderator Emeritus
                      • Aug 2003
                      • 16706
                      #6
                      Glad you found it and are enjoying :T Do you have satellite? My guess is your TV is spreading the ground loop from the satellite hook up via that monitor cable.

                      Jason
                      Jason
                        • Bottom

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • AngelEyes
                          HTPC and Rotel RSP1068 Interference / Noise
                          by AngelEyes
                          Hey chaps, I hope you can help.

                          I finally switched from digital coaxial to 7.1 analogue connections between my HTPC and Processor to take advantage of the new sound formats.

                          Unfortunately the upgrade has introduced a nasty buzzing sound through the speakers. It does not...
                          24 April 2007, 05:21 Tuesday
                        • xspale
                          Rotel 1065 Buzzing Problem
                          by xspale
                          Hi Everyone,

                          I am new to Rotel and this forum. Before few weeks I purchased Rotel 1065 A/V Receiver from 2002.
                          If I am close to speakers I can hear silent buzzing sound from left speaker. I have tried to disconnect everything and switch to fm tuner but buzzing is still there....
                          07 January 2009, 04:14 Wednesday
                        • torgelow2005
                          high frequency noise / hiss, RSP1068
                          by torgelow2005
                          I'm using the RSO 1068 + RMB 1075 and I'm not satisfied with the noise behavior!

                          I'm not talking about white or pink noise from the power amp but about a high frequency signal (kHz range, like
                          tinnitus) mainly from the rear speaker.

                          I only hear this noise when...
                          02 September 2005, 13:14 Friday
                        • wywong
                          RSP1068 problem
                          by wywong
                          Hi, my 4 yrs old rotel rsp1068/rmb1075 suddenly drop the right front channel yesterday. I switch the RSP1068 pre-out right and left front connection and the problem will move from right to left. So it definitely mean it is not a cable or rmb1075 amp issue. I try power cycle, unplug the power and wait,...
                          20 December 2009, 11:31 Sunday
                        • wettou
                          Using white noise to aim and adjust speakers
                          by wettou
                          Using white noise to aim and adjust speakers AIMING and "LEARNING" SPEAKERS Here is a method for "aiming" ...
                          25 July 2010, 16:28 Sunday
                        • Loading...
                        • No more items.
                        Working...
                          Searching...Please wait.
                          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                          Please push the back button and reload the previous window.'
                          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                          Please push the back button and reload the previous window.'
                          An internal error has occurred and the module cannot be displayed.
                          There are no results that meet this criteria.
                          Search Result for "|||"