RSX-1056 or RSP-1068+RMB-1066

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • papay
    Junior Member
    • Jun 2004
    • 4

    #1

    RSX-1056 or RSP-1068+RMB-1066

    I am going to replace my Yamaha RX-V620 with Rotel.I am no using KRELL 300i for the mains speakers.
    I need adwise for the best solution,either RSX-1056 or RSP-68/RMB-1066 for center and back ch.

    papay
  • Tha Freak
    Senior Member
    • Jul 2003
    • 385

    #2
    the combo is surely a K more exp than the RSX-1056...

    it doesn't seem to be a good comparison...

    A better one would be co compare the RSX-1067 (the bigger receiver) and the combo RSP-1068 and that RMB-1066

    cos if you have the money for the combo, I would say get it instead!!
    - - - - - - - - - -

    "Are you gonna bark all day little doggy?...or are you gonna bite?

    Comment

    • Azeke
      Super Senior Member
      • Mar 2003
      • 2123

      #3
      Papay,

      Welcome to the forum.

      My suggestion, RSP-1068 & RMB-1075 for now and perhaps add a 2 channel amp later, of course that depends on budget, tastes, speaker efficiency, etc.

      Just my quick thoughts,

      Azeke

      Comment

      • Andrew Pratt
        Ultra Senior Member
        • Aug 2000
        • 16478

        #4
        I'd agree if you're going to go seperates go for the 1068 and 1075 power amp..its much stronger then the 1066 amp

        Comment

        • aud19
          Twin Moderator Emeritus
          • Aug 2003
          • 16706

          #5
          Ditto on that or if music is a priority, the 1056 and 1080 would be another good option.

          Jason
          Jason

          Comment

          • papay
            Junior Member
            • Jun 2004
            • 4

            #6
            Thanks for the adwise,but since i am going to use my Krell 2X150w for the front spks,i thougt the Rotel RMB-1066 would give me the power i needet for the center and back spk.
            papay

            Comment

            • Andrew Pratt
              Ultra Senior Member
              • Aug 2000
              • 16478

              #7
              It might have enough power but only just and it doens't really give you much of an upgrade path for the future should you get larger speakers or require more power. The 1075 isn't that much more then the 1066 yet its got a lot more power and is generally considered a far better long term amp then the 1066.

              Comment

              • papay
                Junior Member
                • Jun 2004
                • 4

                #8
                Ok,then i go for the RMB 1075 and RSP-1068.
                I also have a choice to buy an second hand RB-985MK2 but this is mybe not any good choice,1075 are mybe a better choice.

                papay

                Comment

                • Andrew Pratt
                  Ultra Senior Member
                  • Aug 2000
                  • 16478

                  #9
                  Actually if the price difference is great the older amp might well be a very sound purchase esp. if it means you can then invest in better interconnects etc.

                  Comment

                  • eelco74
                    Senior Member
                    • Dec 2002
                    • 394

                    #10
                    I tried the 1075, but found a nice used 985MkII

                    I actually like the 985MKII a bit more thant the 1075. Although the 1075 is is a bit more powerfull, I think for the $$ you are better off with a 1068/985MKII combo.

                    I have a 981/985MKII/1068 combo and it rocks. Just wachted Terminator 3 in DTS. Oh boy it sounds soooooo mutch better than my previous setup...
                    Marantz AV8802, Marantz UD8002, Rotel RB-991 and RB985mkii, Rotel RD960
                    Focal/Jmlab Electra 1028S, Electra CC, Electra SW1000S, Cobalt 705
                    Pioneer KRL-37V, Epson EH-TW8100, Kinkping CES-180 77"inch

                    Comment

                    • papay
                      Junior Member
                      • Jun 2004
                      • 4

                      #11
                      Yes it`s a good ide to spend the saved money with better interconnecting cables,I know this from earlier investment,but you get what you pay for,life is to short for listning to bad sound.
                      If I get the ampl.RB985 for 5-600ยง Then I go for it and the RSP-1068.

                      papay

                      Comment

                      • shadow
                        Senior Member
                        • Dec 2003
                        • 315

                        #12
                        I would just get the 1056 receiver and use the Krell to power the front L-R speakers. :P

                        Comment

                        • Andrew Pratt
                          Ultra Senior Member
                          • Aug 2000
                          • 16478

                          #13
                          Sounds like a good plan to me...be sure to check out CatCables if you need quality interconnects at an affordable price :W

                          Comment

                          Related Topics

                          Collapse

                          • csuzor
                            Preamp choices: RSP1068 or RSX1056 or AVR3805?
                            by csuzor
                            Is the better choice the RSP1068 or RSX1056 for pre-amp duty?

                            I will add the RMB1066 (in bi-amp mode) or the RMB1075.
                            I am upgrading from a denon1804 to drive B&W700series in 5channels only (no sub yet)

                            Being budget limited, choosing the RSX1056 allows me to...
                            28 February 2005, 05:27 Monday
                          • sergiok
                            Rsp1068
                            by sergiok
                            hi all

                            i have rsp1068/rmb1095 combo & love it but have found that the rsp1068 gets very hot.was wondering if this was normal?

                            sk
                            31 October 2005, 18:09 Monday
                          • princeoliver
                            RMB1066
                            by princeoliver
                            Does anyone know how the RMB1066 when BRIDGED will be compared to the 985 mkII? I am thinking of using this amp in this mode to power my L/R/C. Will it be a step down from the 985 mkII? I currently use the 985 to bi-amp my front L and R channels. The Centre is bi-amp between my RSX972 and 985. The rears...
                            09 August 2003, 07:31 Saturday
                          • RJS72
                            Firmware update for RSX-1067
                            by RJS72
                            Hello,

                            I just purchased a new RSX-1067 (first Rotel purchase woo-hoo!) from my local dealer, and I was hoping one of the Rotel experts here could answer a question for me. According to Rotel's website, the most current firmware update is listed as 1.1.7 (for the RSX1056, RSX 1067, and...
                            07 November 2004, 12:04 Sunday
                          • muppet
                            Rsx1056/rb-1080 v RSP1068/RMB1075
                            by muppet
                            I have notcied a few people have the above configs. Any one have any comments about which is better for listening to movies in a 54m2 room.
                            14 September 2005, 02:44 Wednesday
                          • Loading...
                          • No more items.
                          Working...
                            Searching...Please wait.
                            An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                            Please push the back button and reload the previous window.'
                            An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                            Please push the back button and reload the previous window.'
                            An internal error has occurred and the module cannot be displayed.
                            There are no results that meet this criteria.
                            Search Result for "|||"