Has anyone tried upgrading the power cords on their gear? I did, using a DIY formula they work awesome and cost a fraction of what expensive aftermarket cords cost.Check out this site for more info http://www.venhaus1.com/diymains.htm
-
-
Which one of Chris' designs did you use? I was looking into his designs. I'm waiting till I get a stable system config.
Scope!
-- Life is a random lottery of meaningless tragedy and a series of near escapes! ---- Life is a random lottery of meaningless tragedy and a series of near escapes! -- -
http://takefiveaudio.com/belden_83802.htm is a goog source for the cable and wall socket ( Canadian too EH ) I use the Flavor 1 on my RB1080 and RMB1075.Then a Flavor 3 on my RSP1066Comment
-
www.partsexpress.com is a good place to get the Wattgate connectors if a guy wants to use audiofile grade connectors and they will send you a cool catalog that has lots of neat stuff in it.Comment
-
Hi Claude,
Wondering which components you attached the power cord to and whether you noticed any sonic differences. I have a Transparent power cord on my Arcam CD player and my Parasound power amp comes with an "audiophile" cord. I was thinking about getting one for my Rotel 1066, but, as of yet, am confused as to how much it will benefit my system on a cost/value basis.
KeithKeithComment
-
Did you make your own interconnects or what are you using? I have another thread asking abour Catcables, but if I can build it for less with parts purchased in Canada I'm very interested.
Scope!
-- Life is a random lottery of meaningless tragedy and a series of near escapes! ---- Life is a random lottery of meaningless tragedy and a series of near escapes! --Comment
-
The benefits of power cords is greatly debated,but I noticed a quiet background,less hash on the top end and more bass control ( serious listening done after 100 or so hours of break in ). Even little things like putting in a new wall socket can sometimes make a difference also checking your wall sockets with a circut tester is a good idea.Comment
-
I didn't build my own interconnects ( I don't trust my ability to solder ) but there are some good DIY ideas out there that would work quite well Belden 89259 cable is quite popular for many cables.Comment
-
http://www.echoloft.com/articles/belden/89259%20fab.htm this is a good description of how to build a high quality interconnectComment
-
What interconnects are you using? Damn I'm nosey[lol]!
Scope!
-- Life is a random lottery of meaningless tragedy and a series of near escapes! ---- Life is a random lottery of meaningless tragedy and a series of near escapes! --Comment
-
http://www.geocities.com/jonrisch/cables.htm another good source for DIY cable infoComment
-
I use NBS Dragonflys from my RSP1066 to RB1080,AR Master Reference from the 1066 to the RMB1075 for my surrounds,Kimber Hero from the analoug out on my DVPS7700 DVD player,Monster M1000S for the digital out on the DVPS7700,Kimber 8TC for my main speakers,Kimber 4TC for the center,Kimber 4PR for the rears.Originally posted by WhitmanComment
-
Thanks for the links. Damn man just give me your icq and we can save the forum some bandwidth.
Scope!
-- Life is a random lottery of meaningless tragedy and a series of near escapes! ---- Life is a random lottery of meaningless tragedy and a series of near escapes! --Comment
-
Hey guys,I've been following the "power cord" thread here, and find it quite interesting.On another message board I read about a really cheap PC availabe to sorta"test the water" on power cord upgrades.This cord is made by Volex,2 meter,14 gauge shielded,OD of about 9mm.Lots of good... -
I own 2 Harman Kardon Signature amps...a 2.1 & a 1.5.
They both have puny ungrounded power cords. The 2.1, which has the most current draw, has the smaller cord (beyond my understanding as to why).
I know for sure I am going to install bigger cords. Should I just replace... -
I just purchased the rotel rmb-1095. In doing so, I need to move some equipment to make more room. The cord on the rotel pre-amp isn't long enough, and the book says not to use extension cords. Not sure why, but wouldn't it be ok if I use a heavy gauge cord? The rotel's is 16 gauge, and I have a... -
Based on some discussion in another thread, I went ahead and ordered a VH Audio Flavor 3 power cord to replace the stock cord that came with the 1066 pre/pro. However, when it arrived today, I noticed that the cord had a three-prong female receptacle with a three-prong male receptacle versus a two-prong... -
I am saddened to see the Power Cords thread, started by Jaynaldo , is closed , and particually because there are some good points made by a few of the posters .
Many people misunderstand about Wire , Cables , etc ... of all types used in Audio , AND , I do understand such , ...
Comment