Hi. Don't come here often, but I know where the expertise is. I'm in the process of moving and obviously had to disconnect my system. My question is this: Does the RSP-1068 lose it's settings and configurations when removed from AC power for a period of time? I don't know how long it'll be before I'm reconnected and I'm concerned that I'll lose all of my settings. Thanks in advance for the help. A great site
-
-
It will hold it's settings indefinitely (written to eeprom) , but if your unit is not at 1.28 firmware I would go ahead and write down all critical settings. Older firmware has an issue with losing settings while exposed to lower then normal AC voltage (usually during brown-outs), but could happen while killing power.
That said, moving to a new room will require setting back up all the critical settings anyway, so you may not even need to worry about it.
Kevin D. -
Kevin is exactly right. Moving into a new listening room will require a complete re-calibration of all your settings anyway!.Dan Madden :TComment
-
Hi,
Wonder if someone could help me. I have the RSP1068. I am using a REL Q100E which unfortuntely does not allow me to disable the crossover via the RCA in. I currently run my Front LR speakers full range and the bass is tapped via the high level to the REL. I currently set the REL... -
How in the world can this happen. I leave for work at about 7:30 am and leave the plasma and 1065 on so my wife can watch tv during the day. Long story, but I havent got the ir system working yet, so I cant teach her to turn everything on and off yet.
So anyway, I come home from work... -
Hi everyone I am new to this even though I am longtime rotel owner, so be gentle.
I have a RSP1068 with a bass managment issue.
I have four large speakers and a sub and a small centre speaker
The rotel won't let me have a small centre speaker without dumping... -
I recently activated mediashare on my Directv HR23-700 HDDVR, so I can play music, video and pictures on my PC through the DVR and hear them through my A/V system, and see the pics on my TV. Everything is set up properly on both my Win 7 PC and on my DVR. However, when I play an mp3 file, I get no... -
Hello!
I was just curious to see what you all are doing in the setup menu for Dolby Pro Logic IIx and what size your room might be. I've been playing with the settings for a little bit now and am starting to find how each works (good and bad) with the signal.
I can definitely...
Comment