Hi guys - I have a pair for 4ohm speakers for the fronts (dynaudio), a pair of 8ohm speakers for the back and a 6ohm mid speaker (dynaudio). I wanted to know if the different impedances would cause any problems for the RB985MKII?
RB-985MKII Speaker Impedance
Collapse
This topic is closed.
X
X
-
No.
As long as you are connecting one speaker per amplifier channel and each speaker is of a nominal 4 ohm impedance or higher, there is no problem using speakers with different impedances.
It is always desireable (but not mandatory) that the speakers have similar sensitivity so that the preamp-processor doesn't need to drastically attenuate or boost a channel's signal.
Steve- Bottom
Related Topics
Collapse
-
by jbreezy5This is a review/comparison of the KEF XQ5's with Dynaudio Audience 82's:
I purchased a pair of KEF XQ5's used yesterday for $1,000 from Theatrical Concepts Inc. on Craig's List. They seem to be fully broken in; they lack the typical signs to indicate otherwise. Initially I was not sure...-
Channel: Audio Hideout
-
-
by JRamboHi, I recently read in a home-theater magazine that the Rotel rsx1067 was their first choice in the heavy-receiver class.. How will this receiver compare to a setup with rsp1068, rb993 and rb985mkII, when it comes to sound quality, as the price for these two setups will be about the same..-
Channel: Club Rotel
-
-
by BoomboxI just read the post in A/V Chalet about LPs vs CDs....
Vinyl (or analogue)? Thanks but no thanks....
I've just received my new pair of Dynaudio Focus 140 stand-mounts (I have them for 5 days now) and last night they disappeared while I was listening to Maxwell's 1996 "Whenever...-
Channel: Audio Hideout
-
-
by gizmoHi ...i have a Rotel and need a advice with a good center.
I have 2 options
Dynaudio Contour Center
or Dynaudio Contour 2.1 T
....look specs!!!
http://www.avguide.com/product/Speak..._T2.1/1794.jsp
...-
Channel: AV Chalet and Home Theater Hangout
-
-
by ribkinHi folks. Not so long ago I purchased my first set of speakers, they're mentioned in the title... I had previously considered Arcam electronics to mate them with but my perception of buying used Arcam AVR gear has taken a 180 degree turn after not one, but two negative experiences ... of the DOA variety....-
Channel: Club Rotel
-
- Loading...
- No more items.

Comment