Hi guys - I have a pair for 4ohm speakers for the fronts (dynaudio), a pair of 8ohm speakers for the back and a 6ohm mid speaker (dynaudio). I wanted to know if the different impedances would cause any problems for the RB985MKII?
-
-
No.
As long as you are connecting one speaker per amplifier channel and each speaker is of a nominal 4 ohm impedance or higher, there is no problem using speakers with different impedances.
It is always desireable (but not mandatory) that the speakers have similar sensitivity so that the preamp-processor doesn't need to drastically attenuate or boost a channel's signal.
Steve -
SRB is probably right but your setup seems a bit messy to me!!Dan Madden :TComment
-
Impedance
In loudspeaker design, impedance is a critical electrical characteristic that directly influences how a speaker interacts with amplifiers and affects the overall performance of the audio system. Impedance is a measure of the opposition to the flow of alternating current (AC) in an electrical circuit. It is represented in ohms (Ω) and varies with frequency in speaker systems. Impedance is essential for loudspeaker design because it influences several aspects:- Driver Selection
19 July 2023, 10:19 Wednesday -
This is a review/comparison of the KEF XQ5's with Dynaudio Audience 82's:
I purchased a pair of KEF XQ5's used yesterday for $1,000 from Theatrical Concepts Inc. on Craig's List. They seem to be fully broken in; they lack the typical signs to indicate otherwise. Initially I was not sure... -
Hi, I recently read in a home-theater magazine that the Rotel rsx1067 was their first choice in the heavy-receiver class.. How will this receiver compare to a setup with rsp1068, rb993 and rb985mkII, when it comes to sound quality, as the price for these two setups will be about the same.. -
I just read the post in A/V Chalet about LPs vs CDs....
Vinyl (or analogue)? Thanks but no thanks....
I've just received my new pair of Dynaudio Focus 140 stand-mounts (I have them for 5 days now) and last night they disappeared while I was listening to Maxwell's 1996 "Whenever... -
Hi ...i have a Rotel and need a advice with a good center.
I have 2 options
Dynaudio Contour Center
or Dynaudio Contour 2.1 T
....look specs!!!
http://www.avguide.com/product/Speak..._T2.1/1794.jsp
...
Comment