RSP 1068- fading display

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • RoMan
    Senior Member
    • Jan 2007
    • 212

    RSP 1068- fading display

    Hi all,

    My display on my RSP 1068 preamp is starting to fade out. For example the subwoofer letters seem really dim. I have it turned up to bright on my remote but the letters are dim with certain functions on my display.

    Is it possible its a fuse that needs to be replaced? Any advice is most appreciated on how to remedy this situation. Thanks again.

    RoMan
    :T
  • srb
    Senior Member
    • Oct 2004
    • 311

    #2
    There is a Display Refresh Procedure that might remedy your situation.

    Steve


    Date: March 13, 2006
    Models: RSX 1056, RSX 1067, RSP 1068
    Subject: Front Display Refresh Procedure

    The fluorescent front display of the RSX 1056, RSX 1067 and the RSP 1068 utilizes a dot matrix display consisting of hundreds of pixels, which illuminate as needed. Over time, the pixels that are used frequently will remain fully illuminated, while those pixels that are not illuminated often may lose brightness. Refreshing the front display periodically will ensure that all pixels are restored to their full illumination across the display.

    For this purpose, there is a refresh procedure that enables the display to be refreshed at any time. Activating the refresh mode of the unit will illuminate the entire front display, and after a period of time, all pixels will be equally bright. Depending upon how frequently the display is refreshed will determine how long the refresh period needs to be – at most a period of about 4-5 hours should fully refresh the display, or less time if done at regular intervals.

    To activate the refresh mode of your unit, place the unit into the standby mode. Next, press and hold the “2CH” and “MUTE” buttons on the front panel simultaneously while powering the unit on with the remote control. The unit should power on with all the pixels of the display illuminated and the front panel buttons can be released at this point. The unit is fully functional while in the refresh mode and the unit can be put into the standby mode and the display will remain in the refresh mode. The refresh mode will be deactivated once the unit is brought back out of standby.

    If you have any questions, please contact our Technical Support Department at 800-370-3741.

    ROTEL OF AMERICA  54 CONCORD STREET  NORTH READING, MA 01864  PHONE: 800-370-3741  FAX: 978-664-4109

    Comment

    • windshear
      Senior Member
      • Dec 2004
      • 243

      #3
      Check out this thread.

      Comment

      • RoMan
        Senior Member
        • Jan 2007
        • 212

        #4
        Thanks srb and windshear. I'll try it out. This forum is great. Lots of knowledgeable Rotel folks whose timing always right on for help and willingness to assist those in need of information. Awesome.

        RoMan

        Comment

        Working...
        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"