Currently have the 1077 amp connected to a 1069 in a 5.1 channel set up and 2 remaining channels powering zone 2. Using a 12v trigger to power the amp. The problem is that when I power on my system there is sound only coming from the right front, right surround speakers and sub, no sound from the center channel or left speakers. I did a test tone thru the 1069 to confirm this.
Powered the system off, disconnected the amp and so forth and nothing solved the issue. Later powered the system on and the problem was gone all speakers working. Then this morning the problem again. What I've noticed is that when the system is powered on the amps red protection lights are not coming on or off like they normally do.
Any suggestions, this is driving me crazy!
Powered the system off, disconnected the amp and so forth and nothing solved the issue. Later powered the system on and the problem was gone all speakers working. Then this morning the problem again. What I've noticed is that when the system is powered on the amps red protection lights are not coming on or off like they normally do.
Any suggestions, this is driving me crazy!
Comment