Hi all I've owned my 1067 for four years without a problem until today. I was listening to some music a medium volume, when all sound cut out. I cannot get any sound on any channels appart from some low sound from the sub. Are there any fuses I can check or would be likely an internal problem. Thanks for any help/advice, thought I would try here before the monumental task of unplugging everything and sending off to International Dynamics for repairs. Jeff
-
-
I haven't tried that model. But I'm sure the fuses are located so that they're easily accessible. If it is a blown fuse replacing it is easy. The manufacturer is irrelevant but the numbers on the fuse must be the same.
The fuses look like this. http://www.drillspot.com/pimages/425/42518_300.jpg
If it is a blown capacitor you can also replace it yourself, but that requires soldering skills.
A blown capacitor will look like this. http://i29.tinypic.com/2e504rm.jpg -
Jeff,Originally posted by Raaf Hornet
Welcome to the forum.If the fuses are good then you may have a bigger problem with the digital processing board.There is a way to test this but you would need a seperate amp and use the multi channel inputs and preouts as it bypasses the digital board.Let us know the out come.Comment
-
Should still be able to use the multi-channel inputs and the internal amps. That will still bypass the digital board.
Kevin D.Comment
-
Hello,
Has anyone changed the fuse in a RB-1095.
I don't get audio coming out of the rear channe, I think one of the fuses is blown. I opened the 1095 and the fuses are buried way in the PCB.
I experienced this with the 1080, It was a blown fuse. The fuses in the RB-1080... -
Has anyone found a long term solution to the 1080 fuse issue?
Some of the blown fuse posts seem to have started in early 2004. Has anyone who has blown a fuse managed to go at least 6-8 months without blowing them again and if so did they leave it on all the time, not use trigger or some combination?... -
Have what until today was a perfectly functioning Cinenova 5.
Well I have had an issue, not a small one, and am very upset with Earthquake's response. We had the system on playing a movie as background noise when I heard a loud POP and a strange noise I'd never heard before. I glanced back at... -
Help.
I think I have a blown fuse in my RC1090 preamp. I took of the cover and saw that the fuse had a clear cover over it with a warning do not remove unless a trained tech. I suppose the warning is because of the power supply, but by just looking at the fuse it looks broken. Its a very... -
Hi all...
The problem: My RB-991 blew its main 12-amp fuse the other day (the fuse you can easily change from the back). I tried 10-amp fuses, but blew three in a row. No other components or speakers were hooked up to the amp. I unplugged the amp from the wall before swapping fuses....
Comment