I Need An Rlc-1040!!!!!!

[B_W_Guy]

I have been searching and searching and searching for this power conditioner. I do not want the APC H15. Does ANYBODY know where to get one of these. Please help. Its the last piece I would like in my system. Thank You

[Opus007]

here:

http://www.audiogon.com/cgi-bin/cls.pl?powrcond&1252360856&/Rotel-RLC-1040-Power-Condition

[BWLover]

test

[cdika17]

get an APC H15, same thing

[miner]

I have a RLC-1040 and an APC H15. My only gripe about the Rotel vs the APC is that if I have a power outage and then the power returns, all that is plugged into the Rotel unit will power on except for the TV. This can be a problem if you are away from the home for a period of time. Rotel does not have an answer for this.

[BWLover]

the APCH15 is not the same thing. read the specs. thanks everyone

[Kevin D]

I read the specs, which part is different?

From both manuals:

Technical Specifications
The following table contains the specifications for the H15.
Item Specification
INPUT
Input Voltage Range for Operation
(on utility)
92V - 144V
Nominal Voltage 120 Vac
Allowable Input Frequency for
Operation (on utility)
47 - 63 Hz
Rated Input Current 12 Amps
Input Circuit Breaker Rating 15 Amps
OUTPUT
Number of Outlets 12 (all outlets are surge protected,
conditioned, and regulated)
Output Regulation +/- 5%, 10%, 15% for AVR
Range = Narrow/Normal/Wide
Outlet type NEMA 5-15R
Rated VA Capacity 1440VA
Rated Watt Capacity (continuous) 1440 Watts
Rated Output Current 12 Amps
SURGE PROTECTION
Let-Through Voltage Rating <40 Volts
Peak Surge Current (NM + CM) 250KA
Data Line Protection Jacks (splitter) Single-line 2-wire phoneline protection
for phone, modem, or fax.
Coax 5MHz-1GHz Two pairs (one
with splitter)
MISCELLANEOUS
EMI/RFI Attenuation 40-100dB at 100KHz-30MHz
Total Surge Joules 5200 Joules

RLC-1040

Specifications
INPUT
Input Voltage Range for Operation 92V - 145V
Nominal Voltage 120 Vac
Allowable Input Frequency for Operation 47 - 63 Hz
Rated Input Current 12 Amps
Input Circuit Breaker Rating 15 Amps
OUTPUT
Number of Outlets 12 (all outlets are surge protected, conditioned
and regulated)
Output Regulation ±5% for Narrow Range AVR
±10% for Normal Range AVR
±15% for Wide Range AVR
Outlet type NEMA 5-15R
Rated VA Capacity 1440VA
Rated Watt Capacity (continuous) 1440 Watts
Rated Output Current 12 Amps
SURGE PROTECTION
Let-Through Voltage Rating <40 Volts
Peak Surge Current (NM + CM) 250KA
Data Line Protection Jacks (splitter) Single-line 2-wire phoneline protection for phone,
modem, or fax.
Coax 5MHz-1GHz Two pairs (one with splitter)
MISCELLANEOUS
EMI/RFI Attenuation 40-100dB at 100KHz-30MHz
Total Surge Joules 5200 Joules
DC Trigger Two 3.5mm mini-jack plugs (5-30VDC)
Physical Dimensions (H x W x D) 3.75 x 17 x 10.1”
Unpackaged Weight 20 lbs.
Shipping Weight 25.4 lbs.
Safety Agency Approvals UL1449, cUL, FCC Part 68 and Part 15 Class B,
NOM

Feel free to call Rotel, they should tell you the same. RLC-1040 = H15 RLC-1080 = S15

Kevin D.

[Opus007]

Opps Kevin beat me to it.

Looks the same to me.Except the Rotel is 1 volt higher in the Input Voltage Range for Operation :T

[BWLover]

i was just going by what i read in another forum

Thanks for pointing out my mistake. I meant to say: Beware! The Rotel RLC-1040 has superior noise rejection than both the APC H10 and the APC H15. Thats the reason for the Rotel costing more. Also, 300 more joules of surge protection and IMO the Rotel looks better.

EMI/RFI Attenuation

APC H10 and H15: 50dB at 100kHz to 10MHz

Rotel RLC-1040: 40-100dB at 100KHz to 30MHz

I may be wrong as I'm no expert but these specs are the reason I chose the Rotel over the cheaper APC units.

Regards, Russ

[BWLover]

but regardless of the two my thanks goes out to Opus007. I'm sending my payment to this guy on Monday. and it matches my equipment.

one thing, why is the Rotel around 9 pounds heavier?

[Opus007]

but regardless of the two my thanks goes out to Opus007. I'm sending my payment to this guy on Monday. and it matches my equipment.

one thing, why is the Rotel around 9 pounds heavier?

No problem and you are welcome.I assume the reason it is heaver is it has the metal fins(heat sinks) on the front panel.Enjoy.