I've noticed a computer connection on the back of my Rotel 1090 control amp. Can I just connect my lap top and play music that way? Or would I have to buy software to install on the computer?
-
Two Channel Room
Vincent SA-T1/Telefunken/Golden Lion tubes~Rotel RB 1080~ Musical Fidelity XRAYv8/XXXpsu~MMF-.7.1~2M Black-Grado Phono 1 Analysis Plus Phono Cable~Canton 830.2~ Analysis Plus interconnects and speaker wire. -
Computer I/O Connector
The RC-1090 can be operated from a personal
computer running audio system control
software from third-party developers. This control
is accomplished by sending the operating
codes normally sent by the RR-969 remote
control over a hard-wired network connection
from the computer.
The COMPUTER I/O input provides the necessary
connection on the back panel. It accepts
standard RJ-45 8-pin modular plugs,
such as those commonly used in 10-BaseT UTP
Ethernet cabling.
For additional information on the connections,
software, and operating codes for computer
control of the RC-1090, contact your authorized
Rotel dealer. -
Would a Mac work?
SalComment
-
Hi!
Does anyone know if the connection cable that comes with the RR1090 remote control is the same as the one used to SW upgrade the RSX1055? It has the same plugs.
-Audun
Regards,
Audun04 September 2003, 19:27 Thursday -
are there ir codes to put in this remote to operate a (denon 2200,sony tv,etc) or do i have to input one at a timefor every remote. -
On the back of the RSX 1067 there is an ethernet port - with a dongle that converts it to a serial port. My question is - Can I control the receiver via the serial port, and if so, where is the software avaliable. I know that its designed to do software upgrades, but on my old Marantz SR7400 I could... -
THE STORY: After owning a RSX1056 for a couple years, I've just put a PC (a marginally dated AMD2600 XP Machine) in my HT system by SPDIF Audio and Component Video. Ripping my CD music collection to a Network Drive, and able to play it via Windows Media Player. "IF" I had the 1056 on, and... -
I just wanted to share an odd experience I've been having with my trusty old RSP-976 surround sound processor. For quite some time now (well over a year, maybe more) I've been having one helluva time with the remote control. Specifically, the 976 would only respond intermittently to volume up and down...
Comment