When using the 12 volt trigger from RC 1070 to RMB 1075 does it put the amp in standby when I turn off the pre as the power light on the amp stays on.Thanks.
-
-
Yes. The power light stays on regardless (which is a bit confusing), but you should hear a relay clicking in the amp as it turns on and off via the trigger.- Mike
Main System:
B&W 802D, HTM2D, SCMS
Classé SSP-800, CA-2200, CA-5100 -
Thanks mjb .I do hear a click and the clip lights come on and go out.Originally posted by mjbComment
-
I have the RSP 1570 and RMB 1565 which are connected by the 12 volt trigger. From having scanned this forum it seems that when the processor is turned off, the red protection light on the amp should flicker and then go out while the blue power light is always on. On mine the red protection light never... -
Hi folks;
long time lurker and I believe first time poster here
Just recently purchased a 1068/1075 combo and have pretty damn happy.
However I do have a question I'm hoping someone might answer for me.
I'm curious about what the effect... -
I picked up my brand new RSP-1068 Saturday, replacing an old RTC-970. In the process of hooking everything up, i discovered there are no power outlets on the back of the 1068, so I had no way to trigger my RLC-900 to turn on/off. A quick trip to Radio Shack and 15 minutes with a soldering iron got... -
I have an external amp I would like to use with my RX1050 stereo receiver - using the RX1050 as a pre-amp. I am using the pre-out to connect it to the amp and it is working well. However I cannot get the 12 volt trigger to work. Does anyone know what sort of plug the 12 volt trigger out requires? My... -
I'd like to use a 12 v trigger from my Rotel 1098 to a Pioneer DV-45A Elite DVD Player. I can't find any information about Pioneers trigger in. Is this some Pioneer proprietary thing or is it 12 Volt trigger compatible?
I wasn't sure where to post this, but it's really not a Rotel question....
Comment