1067 firmware upgrade

[blk100rr]

Did a search. My 1067's firmware is 1.1.7 040413 Run's great with no buzzing, overheating, issues or any negative issue. What improvements are made with the newest firmware?

[Kevin D]

While a little hard to find now, here's from the Rotel Site:

V1.1.7 to V1.1.9
- Added Dolby Pro Logic II Game Mode.
- Dolby Pro Logic II Emulation changed to Dolby Pro Logic.
- Improved volume speed in both main Zone and Zone 2 via remote control.
- Added User Default Password feature. NOTE: The default password is ‘0000’.
- Added Factory Default confirmation screen to the OSD.
- Corrected a bug to allow Zone 2 control via RS232 when the main zone is in
standby.
- Updated 7CH Stereo DSP mode’s center back channel outputs from mono to
stereo (requires EPROM flash for this update. If you do not use 7CH stereo
this EPROM flash is not required for further updates.)
V1.1.9 to V1.2.0
- Added RVE-1060 control commands to the RS232 output.
V1.2.0 to V1.2.1
- Fixed an intermittent problem of units locking into “Standby” mode until the
rear panel power toggle was engaged.
- Improved digital input sensing and format detection. This improvement fixes
any problems with no audio when changing channels with some Scientific
Atlanta HD digital cable boxes.
- Added RS232 support for RVE-1060 to allow automatic switching of RVE-
1060 inputs.
V1.2.1 to V1.2.2
- Corrected an error in V1.2.1 which caused very low center channel output
when switching between DD/PLII to PLII modes.
V1.2.2 to V1.2.3
- Corrected an error that would allow Zone 2 to be turned on by selecting an
Input when the main zone is in standby.
- Deleted the Pro Logic icon when playing a DD2CH or PCM digital source, per
Dolby’s request.
V1.2.3 to V1.2.4
- Improved memory backup software.
- Added Pro Logic icon for 6.1/7.1 Dolby modes
V1.2.4 to V1.2.5
- Fixed a bug that caused audio dropouts from digital sources when controlling
volume via RS232.
V1.2.5 to V1.2.7
- Fixed some minor tuner display errors (RSX-1067 only).
V1.2.7 to V1.2.8
- Improved memory backup software.

Really if everything is working fine, the only improvements you would see is a PLIIg mode (like PLIIc but with more bass and a little more surround action) and stereo center rears with 7ch stereo (if you have a 7.1 system).

Most were specific fixes for specific problems.

Kevin D.

[blk100rr]

Thanks, I do have a 7.1 system but rarely, if ever use it for 7.1 stereo. My second question, surronds the fact the website says bring the unit to a dealer who has the correct software for installation, but some members here have it. Where can I get the install software?

[Azeke]

Thanks, I do have a 7.1 system but rarely, if ever use it for 7.1 stereo. My second question, surronds the fact the website says bring the unit to a dealer who has the correct software for installation, but some members here have it. Where can I get the install software?

Here you go, make sure you follow the installation instructions to the letter.

Rotel 1067 software update

Peace and blessings,

Azeke

[blk100rr]

thank you all. Now all I have to do is get a buddy still using XP on their PC. Yep, I did the search on that too.