Just wondering if anyone has had any luck with any products to control zone 2 with the 1067. Got it all hooked up and it works just fine, but would be nice to be able to adjust the volume or change sources without opening the door. Looking for a fairly cheap solution and have no experiance whatsoever with IR repeaters. Leaving the RR-1050 remote in the second zone would not be an issue either since i use a universal in the main room 99% of the time anyway.
-
After asking many questions and much internet surfing. I can now activate zone 2 from my bed (the system is in the basement). I can also adjust the volume. Life is good. For those who are interested, I'm using a RB 991 to power zone 2. My repeater system consists of 2 receivers and 3 volume controls.... -
Can someone recommend an infrared receiver for zone 2 on my RSX-1065?
The manual says "Xantech, etc.", and "industry standard remote," but I don't see anything on the Xantech web page that seems to be the right combination of IR receiver, cable, and plug to go into... -
Greetings,
New to forum but not Rotel.
In the last 12 months I've bought the following HT receivers:
RSX-1055 (all software upgrades)
NAD T763 (demo)
and as of last Friday
RSX-1067 (demo)
The RSX-1067 (finally) exceeds my expectations... -
So here's my idea; I have a room dedicated for hometheater with a rotel rsx1057 running a B&W DM300 series surround set.
I also have an RB-1080, 2 B&W 683's and a rcd-1072 setup with a Rc-1070 in another room.
I'd like to use the 683 in the theater room because...20 August 2008, 19:30 Wednesday -
Hello,
I am new to this forum. I am an audiophile with some restrictions to my location - I live in Brooklyn so space is limited, hence the need for smaller Quad Bookshelf speakers and the need to use a Sunfire Subwoofer even though I normally never use Subs. That being said here's where things...
Comment