RSX-1057 questions

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • sskim
    Member
    • Sep 2007
    • 52
    #1

    RSX-1057 questions

    i just got my hands on an used RSX-1057. It's in great condition however it's missing a remote. As I'm trying to learn how to set up and to use the receiver, it seems to me that without the remote, it's not possible to manipulate most setting/adjustment. Is this true or am I missing something? Secondly, do I need to purchase Rotel remote to access all available features or can I get a third party universal, programmerable remote to do the same? If so, any suggestion on brand and model.

    One minor cosmetic imperfection is that there is a 'scuffle'--not quite a scratch--in the display. Does anyone know if there is a fix or can I replace the what appears to be an acrylic plate?

    I think I'll have tons of more questions as I learn more each day. Thanks in advance for all your help!
    Tags: None
      • Bottom
    • Kevin D
      Ultra Senior Member
      • Oct 2002
      • 4601
      #2
      Yes, you will need the remote to set it up. If you're looking to get a good remote for your whole system, any of the Harmony's or Pronto's work well. Range from $100 on up.

      I would doubt that your typical universal would have more then power/mute. A Rotel remote from any of the 10 series products will have the same codes.

      As far as the scratch, might want to check if the previous owner actually removed the protective tape over the screen. It's hard to notice. If not, try some of the plastic polishes made for automotive gauges.

      Welcome to the club.

      Kevin D.
        • Bottom

        Comment

        • sskim
          Member
          • Sep 2007
          • 52
          #3
          RSX-1057 questions

          thank you Kevin!

          That's good to hear since I've agreed to take over Harmony 550 from the previous owner of RSX 1057 so I should be fine then. I will play with it some more once I get the remote.

          As for the scratch, I think you might be right about the protective tape/film because the surface does feel rather soft. When I scratch the screen with my finger nails--to remove a dirt--it feels as though I may damage it if I put enough pressure. But it I have not been able to feel or grab anything yet to peel it off.
            • Bottom

            Comment

            • Kevin D
              Ultra Senior Member
              • Oct 2002
              • 4601
              #4
              You can start scraping with your nail on a corner. Should easily pull up if it's there.

              Kevin D.
                • Bottom

                Comment

                Previous template Next

                Related Topics

                Collapse
                • smm735
                  Remote (RR-1060) no longer working with receiver (RSX-1057)
                  by smm735
                  I recently got a hand-me-down RSX-1057 from my father along with an RR-1060 remote but I am unable to control the RSX-1057 with the RR-1060. Both units were unused (and unpowered) for a couple of years before I started playing with them yesterday.

                  Before anyone posts it, yes I have...
                  07 March 2020, 11:48 Saturday
                • unclemick
                  Remote codes...
                  by unclemick
                  So I got my RSX1057 and started setting up the remote. I can't seem to locate a remote code that will control my DirecTV sat. box. I've looked in the codes that it came with...they have one listed for Hughes which doesn't work. Then I tried to make the remote learn, no dice. It says "OK"...
                  15 May 2007, 22:06 Tuesday
                • Andrew Pratt
                  RSP-1066 / RSX-1055 etc. Frequently Asked Questions (FAQ)
                  by Andrew Pratt
                  Rotel has a FAQ available here that may answer some of your questions. We've added several points of our own as well below.

                  1. How do I know what firmware is installed on my processor?
                  Answer: Simply press and hold the mute button on the remote and it will be displayd on the LCD...
                  15 April 2003, 14:08 Tuesday
                • Skyblue
                  SSP 800 questions thread 20/10
                  by Skyblue
                  Here's Dave's answers, formatted by me, but otherwise not altered:

                  Dave:

                  I would like to add some general comments to supplement the answers below. First, thank you for taking the time to organize the list for me and post the answers. Club Classé is a great way for current...
                  20 October 2010, 16:02 Wednesday
                • bullitt731
                  RMB1077 and RSX1057 system
                  by bullitt731
                  I was planning on using an RSX1057 as a processor with an RMB1077 hooked up to a pair of B&W 804s and a HTM3s. Orignally I thought I would biamp and biwire the L and R fronts using 4 channels of the RMB1077 while using the remaining 3 channels to drive the center and back surrounds.

                  ...
                  08 October 2006, 15:15 Sunday
                • Loading...
                • No more items.
                Working...
                  Searching...Please wait.
                  An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                  Please push the back button and reload the previous window.'
                  An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                  Please push the back button and reload the previous window.'
                  An internal error has occurred and the module cannot be displayed.
                  There are no results that meet this criteria.
                  Search Result for "|||"