Didnt like sunfire amp with rotel?

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • rick c
    Senior Member
    • Aug 2004
    • 430

    #1

    Didnt like sunfire amp with rotel?

    Hope this isnt an ignorant question but i have to ask.Do amps when connected to a reciever take over drastically with their own type of sound?The reason i ask this because i connected a sunfire 300x2 amp to my rotel rsx1056 and did not like it at all.My rotel by itself sounded alot better.The reason i had got the amp was to free up the rec. some since my speakers are 4ohm.Needless to say the rsx1056 solo was alot better than when i added this amp.Should i have used an amp of the same mfg?I was actually thinking about the rb1072 but it's only 100x2.The rsx1056 is 100x2 in 2ch. so i dont think it would of made any difference so i opted on the sunfire since i got a good deal and that they run cool.I can return the sunfire but now i'm back to square one and wonder if i should even bother with another amp.Anyone have a similar occurrence?
  • Kevin D
    Ultra Senior Member
    • Oct 2002
    • 4601

    #2
    Certainly. Everything will color the sound, but the amp can have a dramatic effect. A lot of people experience great results going from a mid-line Yamaha or Denon by just adding a Rotel amp.

    Also don't excuse the RB-1072 based on wattage. It's similar to the 1077 (100x7) that I replaced a 1095 with (200x5), and easily sounds way better. The RB1072 will easily sound like 200watts, and running into a 4ohm load could make it sound closer to a 3-400 watt amp. The whole point of more wattage is more control, the design of the amp gives you a lot more control for the same wattage. I've got my 1091 running a 2ohm load with stride.

    Kevin D.

    Comment

    • FernandoF
      Member
      • Nov 2005
      • 53

      #3
      Hi Kevin,

      Just like Rick C, I have an RSX-1056 and an external amp to drive my front speakers.

      So do you think an RB-1072 could successfully replace my RB-990BX (200Wx2 @ 8 ohms) to drive a pair of Dynaudio's 52SE (4 ohms, 86 dB/W.m), in terms of available current and control ?

      Thanks,

      Fernando

      Comment

      • Kevin D
        Ultra Senior Member
        • Oct 2002
        • 4601

        #4
        Aside from the RB-1090, I would feel confident putting the 100 watt digital amps against anything else Rotel has produced. They do have a slightly different sound, so I do recommend having a trial run or demo if possible.

        Kevin D.

        Comment

        • rick c
          Senior Member
          • Aug 2004
          • 430

          #5
          I think once i get rid of the sunfire i may go that route and try the rb1072.thanks

          Comment

          • FernandoF
            Member
            • Nov 2005
            • 53

            #6
            Rick, please make sure you let us know your results !

            Comment

            • rick c
              Senior Member
              • Aug 2004
              • 430

              #7
              Originally posted by FernandoF
              Rick, please make sure you let us know your results !
              sure thing,but it may take a little while.Still got to return the sunfire and get my refund.

              Comment

              • LikeCoiledSteel
                Senior Member
                • May 2004
                • 210

                #8
                I have heard a lot of bad things about Sunfire amps over the years and thus have avoided them. My buddy just picked up a Sunfire and resold it the next week as his existing Adcom amps blew it away. YMMV
                Steel

                Comment

                • rick c
                  Senior Member
                  • Aug 2004
                  • 430

                  #9
                  Originally posted by LikeCoiledSteel
                  I have heard a lot of bad things about Sunfire amps over the years and thus have avoided them. My buddy just picked up a Sunfire and resold it the next week as his existing Adcom amps blew it away. YMMV
                  Steel
                  Interesting,i've heard more good than bad about sunfire.It was either you liked them or hated them and nothing inbetween.some have said they are voiced matched,not sure exactly what that means but maybe it's true,which is why you either like them or not.

                  Comment

                  • rick c
                    Senior Member
                    • Aug 2004
                    • 430

                    #10
                    Kevin,
                    If possible how does the rotel rb1072 compare to the PS audio trio a-100.I seen very little on the rotel,but the ps audo seems to get good reviews.Both of these would be something i may look at if i could get some opinions.thanks

                    Comment

                    • Kevin D
                      Ultra Senior Member
                      • Oct 2002
                      • 4601

                      #11
                      I haven't heard the 1072 yet, basing my opinion on my 1077. While the only review on it wasn't as good as the 1077, I would think that to be a fluke. Hopefully some more reviews and personal testimonials will come along soon.

                      Kevin D.

                      Comment

                      Related Topics

                      Collapse

                      • kevin l.
                        sunfire pre/amp and amp with B&W 803
                        by kevin l.
                        Is my sunfire TGIII and sig amp (405wattx5) going to be a good match with B&W 803, htm1, 805? I have not heard anyone using sunfire combos with B&W and that concerns me. I'm looking to purchase this B&W combo to work off my sunfire.
                        23 September 2004, 18:50 Thursday
                      • Jeffk
                        B&W with Nuforce/Spectron amps and Modwright/Aesthetix preamps?
                        by Jeffk
                        Over past 8 mths have totally upgraded my HT system, which also doubles as my serious 2 channel system. Now have B&W N803 mains, HTM? center, DS7 surrounds, Sunfire architectural sub, Sunfire TGA5200 amp, Sunfire TGP5 pre/pro, modded Denon 3930ci (modded by The Upgrade Company)

                        I am...
                        02 February 2009, 19:33 Monday
                      • audioqueso
                        Sunfire vs Parasound amp
                        by audioqueso
                        I was looking for a great amp (under $1k) for my B&W Nautilus 805s that are being fed by my Marantz SR6400 for the time being. After much review and audition, I am considering a Sunfire Stereo Amp (300x2) or the Grand Cinema (200x5). Definite pros are they run cool (I have a small baby who will...
                        24 June 2005, 18:12 Friday
                      • sbank
                        Amp wattage question.
                        by sbank
                        Hi All, I have a question on wattage for the RB-1080 amp. I know a lot of you keep your amp on all the time, and some people turn it on and off. I sure don't want to bring up that discussion again on which is better, but I do have a question from a fiscal standpoint.

                        The RB-1080 (I...
                        22 June 2004, 11:19 Tuesday
                      • rick c
                        Cinema Grand & Rsx1056 Or Sunfire Ultimate II?
                        by rick c
                        I've been contemplating adding a sunfire cenema grand (5x 200) to my rotel rsx1056.Lately i found a sunfire ultimate II receiver which i slightly more expensive than the sunfire amp.Between these 2 options that i have which in your opinions would be the best or smartest option.Replace the rotel w/sunfire...
                        18 March 2007, 17:27 Sunday
                      • Loading...
                      • No more items.
                      Working...
                        Searching...Please wait.
                        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                        Please push the back button and reload the previous window.'
                        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                        Please push the back button and reload the previous window.'
                        An internal error has occurred and the module cannot be displayed.
                        There are no results that meet this criteria.
                        Search Result for "|||"