Can anyone tell me which would be the better amp overall.Any real differences etc.I know it's 200 vs 250 x2 but thats all i know.Sound and performance is what i'm looking at.thanks
-
Falling prey to upgraditis and all of the great things I have heard about Parasound I went ahead and got the P3 preamp and A21 to audtion in my home. ASIDE: if anyone wants an in home audition and your local dealer wont do it, contact Paul Brownlee at Parasound (paul@parasound.com). I contacted him... -
Hi
I have heard that this is the best forum to talk Rotel.
I am thinking of buying an used Rotel RB991 to add to my HT setup. I will use the pre-out of my Denon AVR 3805 to connect to the power amp to drive my Dynaudio Audience 82 speakers.
I have heard comments... -
I recently received my Odyssey Tempest Extreme Pre Amp and the Eastern Electric Minimax Tube CD Player.
So finally I was able to hook up my Halo A21 with a quality Pre Amp and CD Player (and the Odyssey Nightingales speakers).
Well, after burning these components in for... -
I recently bought an RB1080. My speakers are 2.5 ohms, and I have to put a 200W non-inductive resistor in series with one side of the speaker cable to bring it up to 6.5 ohms, which the RB1080 handles just fine (It did NOT like 2 ohms and now I see in the specs the RB1080 works only down to 4 ohm, not... -
I have been using the A21 power amp with my romitheus Reference C-Core TVC. Though the TVC has a Balanced IN/OUT, I have been using the RCA to A21. I do not have a Balanced source to TVC.
My question is, with this setup, will it make sense to connect the TVC to A21 with Balanced cable? Some of...
Comment