Can anyone tell me the overall depth of the rsx-1057 including the volume nob and binding posts?
-
-
Here's the line drawing of the 1056. The 1057's hasn't been uploaded yet. The measurements should be the same.
http://www.rotel.com/support/files/c...20Model%20.pdf
Kevin D. -
Mine measures 17.5 inchesComment
-
Thanks guys, the reason i was asking is that on ROTEL's site they say that the depth is 16 5/8 and i had read somewhere else 17 1/2.Comment
-
I was planning on using an RSX1057 as a processor with an RMB1077 hooked up to a pair of B&W 804s and a HTM3s. Orignally I thought I would biamp and biwire the L and R fronts using 4 channels of the RMB1077 while using the remaining 3 channels to drive the center and back surrounds.
... -
Dear,
Thanks all for the great help you have provided. This forum rocks!
A new problem and I seek your help again. I have hooked up the Bluray player to the HDMI input of the Rotel RSX1057 and an HDMI out from the receiver is connected to the LCD TV. I am able to get the... -
Hi,
I would need someone who owns this receiver to tell me the exact depth, all in, that is including the volume knob (they tend to be big and not included in standard measurements) and the electrical plug in the back (these also tend to take lots of space). I just got a receiver which because... -
How much does it affect the sound of a speaker if you change the depth of the original design? I've seen people say that applying the golden ratio to cabinet dimensions helps to minimize standing waves within the enclosure. But I also read in one of the forums that the speaker depth interacts with... -
Back in the 1970s I built a number of enclosures. At first the Phillips/Norelco booklet was my guide. I bought a number of other books too. I only vaguely remember suggestions back then about recommended box depth being related to to the woofer and a fraction of some frequency... maybe the free air...
Comment