My installer recomended that I stick with component cables for the 1092 rather than the hdmi cables. What's the opinion of the rotel community?
-
-
HDMI > Component.Digital Audio makes me Happy.
-Dan -
My opinion is get a new installer. One of the biggest reasons to get the 1092 is it's scaling ability over HDMI. If you don't use HDMI you could save a lot of money.Originally posted by Jaynaldo
Kevin D.Comment
-
Does your TV have HDMI or DVI connection? Because if you do i would ask your installer what he was smoking?Comment
-
Originally posted by Jaynaldo
Holy Shnike'
The HDMI connection on the RDV-1092 allows you to video upconvert (scale) line double + video enhance your standard DVD picture... The component outputs are standard 480i (520) ... the HDMI is potentially 1080P ...
Hhmmmm.... Print these responses and hand them to him!
Why he would even consider Component is interesting, it begs for further questions, like your display device... is it HDMI?Comment
-
Interesting that the rdv 1092 doesnt upconvert over component...are you sure about that?
On a side note I have done a lot of comparisions between HDMI and component using an external processor and achieving 1:1 pixal mapping. In all my test with 3 different dvd plays and two different displays I have seen no evidance that HDMI is supperior in picture quality then component. In fact I found component to be better.
Its been marketed to be better, but I believe until I see something different its just been marketed that way to make copy right protect etc taste better.
My RDV 1060 plus Iscan HD using component going to my Fujitsu SMOKES the RDV 1092 with HDMI. Just kills it...and I really wanted the RDV 1092 to be better.Comment
-
If his display upscales the component input better than the 1092 does over HDMI or just simply has better electronics on the component input over his displays DVI/HDMI input he could very well get better results with component. Perhaps his installer tested and noted that?JasonComment
-
Attention Video Experts:Originally posted by Vancouver
DVD players that follow the law (Macro vision) (DRM = Digital Rights Management) and various other legal mumbo jumbo do not upconvert via Component (it's the law)
So all these component vs. HDMI discussions are interesting but are quickly becoming dated in fact not really even relivant...
If you are using and external scaling device componenet is excellent, if you're buying a scaling DVD player component is 480i
if you have an external scaler any dvd player with componenet is fine...Comment
-
Andrew, isn't it possible to get progressive output on the Rotels component output? When I looked at this player (using component), I don't think that I could see a difference between the 480, 720 and 1080 settings but if I remember, a good difference between "i" and "p". That would also tell my that the Rotel's de-interlacing is a lot better than those inside the high-end plasma screens that where there on display..Comment
-
It should be noted that some displays will convert a digital signal via DVI/HDMI to analog and then back to digital. For these displays, component can be better because one less conversion step is needed. Some of the Sony Grand Wega projection LCDs do this.Comment
-
As a new owner of RDV-1092, I've been tweaking, comparing picture quality thru component and HDMI outputs, but had some hard times trying to switch from one to the other and back.
I have my Mitsubishi HC3000 projector connected with both connections to the rdv-1092 and if I switch the...30 April 2007, 05:00 Monday -
I wish I could make this non-model specific, but so far, this is all I know of actually delivering to consumers. Got an Integra press release today.
Looks AMAZING for only $800! Note the deep color capability, Audyssey room correction, HDMI upconversion, and HD audio decoding!
... -
Just read an article in a high end rag which talks about a problem with expensive HDMI cables. Seems that very expensive HDMI cables are very stiff and heavy, so they can damage the HDMI component chassis connectors. The cable industry is aware of the problem and they are working on a solution but... -
Good afternoon everyone,
I had to send my RSP-1098 to Rotel for a recurring LCD display issue. It seems that the relays were upgraded from 2A to 5A as well as some other minor circuit modifications. While it was there I requested a HDMI component upgrade, which they graciously honored,... -
I'm expecting the 1092 reviews anxiously.
I have a terrible doubt if I should go to a really expensive player like the 1092 or just buy an inexpensive one (like the Marantz DV6600). For the moment I don't need the 1080p as my projector is only 1080i but I really need the HDMI output....
Comment