For some reason I can't get into "Test Tone" on the On screen display either with the remote or the control knob. Does anyone know why?
Adz
Adz
-
Adz -
You can't enter the Test Tone menu if your active input is Multi Input or if you're in Bypass analog mode. If that's what's stopping it, just switch to a different input, and you should be able to get in. -
did that fix your problem?
Comment
-
Yes, it did. Sorry for the late follow-up. Thanks!!
AdzAdzComment
-
WARNING - this looks like my previous post about the amps, but I'm asking about the processors in this post.
I'm using 703s, HTM7, and 705s for a 5 channel HT system w/music secondary. I'm going to use either a 1095 or 1075 amp. The question I have is this: Will the 1098 make a noticeable... -
Hi,
This is my attempt at a V2.0 Wish list of enhancements for the Rotel RSP 1098
This updated list is based on feedback on the V1.0 list published in a separate thread within this forum and a second consolidated view of all the other threads I can find in this and several other... -
Hi,
As a long time lurker and “newbe” member of this forum I thought I’d start a service of managing a list of suggested upgrades to the RSP 1098. Thanks to all the helpful advice from this forum I have my order in for a 1098 of my own (waiting on the DTS-ES issue being fixed).... -
Hello:
I have a question about 1098 setup that I'm hoping an owner or former owner can help me with.
As quick background, let me describe my current setup: 1072 CD player feeding an RSX 1056 into the multi inputs. The reason I have it going into "multi" is that... -
Hi,
It was suggested to me by one of my sources that the DSP EPROM update in the latest RSP-1098 firmware release (plus the native EPROM code in the RSP-1068 and RSX-1067) fixed the issue that many of us RSP-1098 owners had with the Sub level in the Test Tone menu being 10 dB too low...
Comment