Guidance...oh, Sage Ones...

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • donk93953
    Junior Member
    • Mar 2006
    • 20

    #1

    Guidance...oh, Sage Ones...

    soooo, its kind of a Rotel question, because the guts of my system are Rotel. Rotel RC 1070 Pre Amp, Rotel RCD 1072 CD Player, & Rotel RB 1080 Amp.
    I need to power up some speakers in my bedroom for just back ground noise. So I grab a pair of (dont cringe) POLK R-15s, perfect to hide on top of the armoire.
    I pick up a AudioSource AMP100 (perfect power, right?)....so I get the amp. Oh , it doesnt turn on before even being hooked to speakers. Oh, damn, blown fuse. OK, I replace it. Hook everything up correctly and....nada, zilch, zero.
    No sound. Hmmmm, so I up the volume on the Rotel RC1070 pre-amp to party levels and the POLKs kick into gear at the same level as the speakers in the primary listening room.
    Turn down the volume on the Rotel RC1070 pre-amp and nada now in the bedroom!?><)!&*#&?...I have the volume nob turned up to "11" on the AudioSource amp....When I crank the volume on the Rotel PreAmp the POLKs come to life. So what gives.....should I get it back to Audio Source and request a new one?
    Or have I overlooked something?
    Gracias,
    Donk93953
  • Kevin D
    Ultra Senior Member
    • Oct 2002
    • 4601

    #2
    Where did you hook the RCA going to the AMP 100? With it having it's own volume control, you need to go out of the record outputs, not the main outputs.

    Kevin D.

    Comment

    • donk93953
      Junior Member
      • Mar 2006
      • 20

      #3
      Ok Ill be stupid..record outputs on the Rotel preamp or AudioSource amp?
      Gracias, Don

      Comment

      • Kevin D
        Ultra Senior Member
        • Oct 2002
        • 4601

        #4
        Record out on the rotel to input 1 on the AMP 100.

        Kevin D.

        Comment

        • donk93953
          Junior Member
          • Mar 2006
          • 20

          #5
          So, have I got this right? Rotel RC 1070 Pre Amp....Tape 1 OUT to the AudioSource Amp? Correct...?

          Comment

          • donk93953
            Junior Member
            • Mar 2006
            • 20

            #6
            Got It ! Thanks A Bunch!

            Comment

            • Kevin D
              Ultra Senior Member
              • Oct 2002
              • 4601

              #7
              Correct, that will be a full volume signal going to the AMP 100, where you can then use the volume controls on the AMP 100 to adjust the sound. Be sure to turn the 'RECORDING' dial to whatever source you want to listen to in the bedroom. This will also give you two zones of sound, one source in the main room and another in the bedroom.

              Kevin D.

              Comment

              • donk93953
                Junior Member
                • Mar 2006
                • 20

                #8
                Gracias!

                Comment

                • miner
                  Senior Member
                  • Mar 2005
                  • 900

                  #9
                  I just learned something new. Thanks guys.

                  Comment

                  • snowball
                    Member
                    • Feb 2006
                    • 70

                    #10
                    Originally posted by miner
                    I just learned something new. Thanks guys.
                    hehe same here!
                    thanks !!!

                    Comment

                    Related Topics

                    Collapse

                    • chinets
                      What Amp. besides Rotel to use with N803?N804
                      by chinets
                      What Amp to use with with N803 & N804???

                      --------------------------------------------------------------------------------

                      I am 50%-50% Music listner of all types of Music and an avid HT fan so I have upgraded from B&W 703 front,704 rear and now since one week NEW...
                      26 June 2005, 07:08 Sunday
                    • chinets
                      Will Rotel drive B&W N803 and N804?? URGENT
                      by chinets
                      What Amp to use with with N803 & N804???

                      --------------------------------------------------------------------------------

                      I am 50%-50% Music listner of all types of Music and an avid HT fan so I have upgraded from B&W 703 front,704 rear and now since one week NEW...
                      26 June 2005, 08:03 Sunday
                    • chinets
                      Will Rotel 1095/1098 drive B&W N803 and N804?? URGENT
                      by chinets
                      --------------------------------------------------------------------------------

                      What Amp to use with with N803 & N804???

                      --------------------------------------------------------------------------------

                      I am 50%-50% Music listner of all types of Music...
                      26 June 2005, 08:05 Sunday
                    • Woogi
                      Low Volume On A Rotel?
                      by Woogi
                      Hello,
                      Im a new poster but a long time reader of these fourms, and I have just changed out some equitment at a friend of mines home Including replaceing an older Denon Amp with a Yamaha HTR-5960. But After connecting his rotel amp (i cant remember the model but it was from about 1998ish a two...
                      04 May 2006, 03:13 Thursday
                    • Chris Cargen
                      On Rotel 1098 - Does volume cntrl adjustment turn TFT on each time?
                      by Chris Cargen
                      I've read that the Rotel 1098 TFT come on every time the volume is raised up or down and/or that the display cannot be completely blacked out while in use. Believe it or not, I just left a dealer who had one on display, but not hooked up yet who was clueless and didn't know.

                      Was this...
                      15 December 2003, 22:01 Monday
                    • Loading...
                    • No more items.
                    Working...
                      Searching...Please wait.
                      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                      Please push the back button and reload the previous window.'
                      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                      Please push the back button and reload the previous window.'
                      An internal error has occurred and the module cannot be displayed.
                      There are no results that meet this criteria.
                      Search Result for "|||"