New Rotel Owner - Break in Period for RSX-1056
Hello Fellow ROTELians! I purchased my new RSX-1056 just yesterday together with a pair of Paradigm Monitor 11 and i'm so excited about it. i didn't owned any stereo or amplifiers before. I fell in love with Rotel when i heard it on a store powered by KEF bookshelf speakers. I bought the RSX-1056 because of Love At First Sight. Can you guys let me know how long is the break-in period for the Rotel and d Monitor 11. I am using a Samsung Dvd+Vhs combo Player. Thank you very much!!!
-
-
congrats Hermie,
To get the best soundresults I would advice to buy a Rotel RDV 1050/60 dvd player as well, or , if you listen in stereo a lot, a RCD 1072 cd player. That would make a huge difference. About break-in time: Let it run for 7 days non stop on low volumes.
Most important is the music source, that means the player. Garbage in, garbage out.
Now I don't say your Samsung is garbage, but you will get master results with a dedicated player.
Spinners.RSX1056, RB1070, RDV1050, RCD 1072, Dali IKON 2, 2x REL Quake II -
Thanks Spinners! RDV-1050/60 is my next project but maybe later. Have you heard of Pioneer DV-686S dvd player? It's a lot cheaper and lot of fuctions. That was a friend suggestion. Dv-686s cost around 250 us$ while rdv-1050 is around 800$ here.Comment
-
Congrats,the 1056 is a really nice unit.If you are a critical music listener a dedicated player or better quality unit will be most pleasing.For mostly movies any decent unit will suffice.Comment
-
Welcome to Club Rotel Hermie. I initially ran my equipment for around 3 days at low volume, let the components cool, and then play at normal volumes. Your total breakin time may vary, but usually 100 hrs is the baseline, if in fact you believe in the "break in" theory. Just my $0.02.
Enjoy your new toy,
AzekeComment
-
Welcome to the CLUB buddy!! Enjoy your Rotel as we do with ours.... stick around and join the festivities!Analog: VPI Scoutmaster w/ Steel Delrin clamp + Dynavector 20XH cart
Digital: SB3 + PS Audio Digital Link III DAC
System: Cary Audio SLP-98P Tube Preamplifier w/ Sylvanias -> Plinius SA102 Class A amplifier -> Martin Logan SUMMITS/Strata Minis -> 8O (me)Comment
-
I know! I'm from the Netherlands, Rotel is expensive over here too. I would suggest the pioneer for movies, since it's a very good player. For 2 channel sound save up for a RCD 1072 cd player. But then again, it all depends on what you want. For me 2 channel is far more important than movies.Originally posted by HermieRSX1056, RB1070, RDV1050, RCD 1072, Dali IKON 2, 2x REL Quake IIComment
-
Hi Hermie,
welcome to the club.
Enjoy your new components till the upgraditis will catch you.
I have to agree with spinners. Shit in Shit out. What your source do not bring into your Receiver the speakers cannot bring it back. So if you are a big music fan, start with the RCD 1072, an excellent CD Player, and if you are a Movie freak, try the RDV 1050, which somtimes can be caught for 500€ here in Germany.
You will be surprised what a huge difference the right source can make.
Anyway it all depends on good recordings. Bad recordings sound also bad on good equipment. In this case music and movies underlies the same rules.
Stay tuned. lmiblmibComment
-
Hi Imib,
You are so right. One can buy € 20.000 worth on equipment, if the recording sucks,
you will be disappointed. Isn't it strange that there is no international guideline for a good recorded cd, like a mark or something? A €15 cd messing up your expensive gear
is no joke at all.
Oops, sorry if this is off topic, will star new thread about this.
spinnersRSX1056, RB1070, RDV1050, RCD 1072, Dali IKON 2, 2x REL Quake IIComment
-
Thank's Brothers for all your suggestions! really appreciate it! :TComment
-
Those of you who have the rsx1056 with a dvd-a/sacd player how did you do the setup in the rsx1056.I understand that settings are done thru the dvda/sacd player but how about the receiver.I was looking at my receiver last nite and i beleive you need to go in the multi setup options but didnt see real... -
On my rotel rsx1056 when listening to the tuner if i press 2ch on the remote i will get "bypass" which is fine.When i'm listening to cd's if i do the same 2ch i get "pcm".Now my cd player is connected both digital and analog to the receiver.I'm assuming i get "pcm" because...
-
I always thought that the rsx1056 should not be used with 4ohm speakers.Atleast that's what rotel told me a while back when i was inquiring about dynaudio speakers,so i ended up with B&W 603s3's/lcr600(really liked them anyway).Well i have upgraded my speakers to a System Audio setup(sa1750/sa720av/sa505's)these...
-
Well I don't know if this is a bug or something I don't have setup right but here is the deal.
I use my DVD player as my CD Player as most of you guys do as well. I have 2 different inputs setup as I default input "CD" to PCM 2 Channel and Default input "DVD" to DPL2.... -
I haven't been here in a while so i havent kept up with everything.Anyhow i just got the 40s2000 last week and am presently using denon dv2200 player via component since i also use my rotel rsx1056.Would an upconversion player be benificial to me.Would i notice a big difference in pq.I can always just...
Comment