This is related to DVD-A playback. I have an RSP-1066 with an RMB-1075 amp. My DVD player is a panasonic RP82. Speakers are Paradigm Studio 40, Studio CC, etc & SVS sub. I typically listen to 2 channel music and movies with the speakers set to small on the Rotel, crossed over at 80hz. How should this be set up when listening to DVD-A using the multi-input button? My DVD player has choices for small or large speakers in the multi-channel out section, so should these be set to large or small? How about my Rotel, large or small?
-
-
I'm new too, but as Rotel setting: Large = more bass to me. If your DVD Player has this option, I think you should set it to Large, maybe I'm wrong. Maybe someone else can give the answer. -
I also have a 1066/1075 combination with Avalon monitor fronts, SVS sub and Denon 2910 universal player. For multi-channel music (DVD-A, SACD), bass management must be done through the DVD player as the 1066 mangement is disabled (input is direct) when the multichannel input is selected. I have all speakers set to small on both the 1066 and 2910 with the cross-over at 60Hz (the Avalons begin to roll off there).The BoosterComment
-
I'm getting an int. amp probably one of the rotel's and was also planning on using a universal player to utilize my dvda/sacd collection.My question is i'm not sure if an integrated can be used w/ a universal.Also there would not be a display so would this be a problem in regards to the dvda/sacd player.This... -
Those of you who have the rsx1056 with a dvd-a/sacd player how did you do the setup in the rsx1056.I understand that settings are done thru the dvda/sacd player but how about the receiver.I was looking at my receiver last nite and i beleive you need to go in the multi setup options but didnt see real...
-
Thinking of getting a better dedicated cd player,going used.Has anyone compared the rotel rcd1072 to the arcam ct73t.Both would be about the same price.Since i upgraded my dvda/sacd player i thought i would do this as well.Any opinions would be appreciated.Player would be via analog of rotel rsx105...
-
I just bought a pair of Klipsch KG 5.2's. I now have 5.2's as my mains and surrounds and 4.2's as center surrounds. My center is a KG 2.2v.
The preamp is a Rotel 1055, with a Rotel 985mkII and a RB 1070 powering the speakers. Subs are 2 SVS 20-39's and a 25-31PCi.
The... -
I am considering purchasing a Pioneer 563A ($180) universal player to replace my Toshiba SD5700. I am currently using just the digital connection (not using the 5 analog cables for DVDA). This will be my first experience with DVDA/SACD in conjunction with my 1066 so please bear with me.
...
Comment