I am considering running my Airport Express wireless music piece into an open audio input on my 1068 and using the Zone 2 option to send it elsewhere in the house. Is there any harm in keeping Zone 2 on all the time so as to be able to feed other rooms? Or is there a overheating issue?
-
____________________
Erik
Just another case of the man trying to keep us down! :B -
I had my "zone 2" turned on for several months straight and the 1068 only got warm. Once "zone 2" is turned on it functions whether the processor is active or in standby mode. I never felt that it got any way near being hot.
I've since added an Audiosource Amp200 for my "zone 2" power amp. It's really kinda of cool because it has auto-sensing capability and the ability to connect two sources. Now I can feed it from my PC "Jukebox" OR from the "zone 2" from the rotel. Works really well for me.Bluespower
-
I run my TST off my fronts now. I just have it split off with Y adaptors and the signal goes to my Audiosource monoblock which I have to turn on or off manually when I want to use it. These amps have either a manual turn on, or auto turn on when a signal is present. I'd like to be able to use the TST... -
Ok, i'm about at wits end here.
To simpify what im doing, I'll only refer to three components.
1) The zone 2, which is just a CRT tv with composite video and simple two channel stereo... basicly, its just a tv. I'm not using Coax to feed it any signal, just the composite video and sterio... -
Something I haven't been able to discover through owner's manual or internet forums: I know that if Zone 2 is on, and the 1066 main power is turned off, Zone 2 remains active (the display shows "zone''.)
But what if all sources are turned off, including the souce to Zone 2; is Zone 2 still... -
A few questions about adding a second display in the bedroom.
1 How long can I run component cables from the RSP-1068 output? (around 15metres is the max length I would need.)
2 Is it feasible to spit this component output somehow to get prog scan to this second display?... -
My rsx 1055 was working fine 2 days ago. Turned in on today and it's stuck in zone 2. No display excpet for zone light ...
No audio from fron
Hitting the zone button actually toggles the power on and off !
I re-flashed with the latest software and have the...
Comment