Two Subs with RSP1098

[EAmin]

I'm running two DD-15 subs with my 1098. I hear both subs when I'm playing movies OR watching HD coming in with a Dolby Digital signal. But if I'm watching standard defn TV, playing my Playstation in ProLogic IIx I only here my first sub --- not both. When I do my test tones for the sub, I hear both. What gives?

Thanks in advance for your help.

[Kevin D]

If you reverse the two on the RCA outputs, does the problem move to the other sub? Sounds like there may be two paths to the outputs: 1) is straight from the LFE circuit and 2) is the output from the DSP chip. It's possible that the #2 link is broken on one of the sub outs. I really thought that they were parallel right at the jacks though...

Should be easy for Rotel to send you a new output card, but you could use a y-splitter off of the known good output for now.

Kevin D.

[Andrew M Ward]

I'm running two DD-15 subs with my 1098. I hear both subs when I'm playing movies OR watching HD coming in with a Dolby Digital signal. But if I'm watching standard defn TV, playing my Playstation in ProLogic IIx I only here my first sub --- not both. When I do my test tones for the sub, I hear both. What gives?

Thanks in advance for your help.

Sometimes in the main menu under "subwoofer set-up" you will find the sub turned (triggered) off during certain surround modes.

just a thought