Does anyone know if the slotted circuit boards found in the RSP-1098 are interchangeable with one another?
-
"Dream as if you'll live forever. Live as if you'll die today." -
Do you mean with an indentical one, or can you swap them around to your liking? If it's the second, I don't believe you can, but a call to Rotel would probably be in order. I'm not going to try it..
Kevin D. -
LOL, your latter assumption is the correct one. I'll let you know what they say. ThanksOriginally posted by Kevin DDo you mean with an indentical one, or can you swap them around to your liking? If it's the second, I don't believe you can, but a call to Rotel would probably be in order. I'm not going to try it..
Kevin D."Dream as if you'll live forever. Live as if you'll die today."Comment
-
Rebelman,
They aren't interchangable - the backplane has specific slots for them reflecting the type of signal (video, digital, analog etc) and they can't be interchanged. This has also made the ideas of upgrading specfic boars harder as they chassis is board specific. This was answered in an old thread by Rotel - who advised that they did the design modularly for ease of service but didn't think to go to the extra cost and sophistication of a universal backplane - maybe nextime!
Regards
GeoffComment
-
I suspected this to be the case but I wanted some assurance. Thanks Geoff, you just saved me a toll call.
"Dream as if you'll live forever. Live as if you'll die today."Comment
-
And maybe nextime they will think about not making a modula design as they have not used it to its potential! I mean how could they tease us like that. :evil:Originally posted by Aussie Geoff
FishComment
-
I like to share some of recent experience with my new 3D TV setup with my current Rotel RSP1098/RMB1095 setup. I am hoping this information is useful for anyone with the same configuration out there that are interested to take the 3D plunge.
I had not been very active in the last couple... -
Can anybody tell me if this is normal..?When I use my sub and use the crossover filter in the RSP1098 the sub makes a popping sound every time the RSP1098 clicks from dolbydigital to 2ch and back, and when I change the input from cd to tuner and other settings?28 June 2009, 03:45 Sunday -
sorry to dig up such an old thread! but i have transformer hum and am planning to implement the dc blocker tonight. i intend to use 4 1n4004 (1a 400v) diodes and 4 2200uF 16v electrolytic caps in a similar manner to this, however i will parallel 2 caps to get 4400uF on each half (since i couldn't find... -
Just got my first 2 Rotel components, namely an RSP1098 and an RMB1075.
Very happy with both, even though they are severely being limited at the moment by my cheap Yamaha speakers which will be replaced with B&W (800 or 700 series) very soon.
Only 1 thing i can't get to work, the speaker... -
New Reviews of RSP1098/RMB1075 in the new issue of Widescreen Review.Subscribers can access via their website.20 February 2004, 18:20 Friday
Comment