Recently, my RR1050 remote has displayed "FRQ DIR" and no buttons work. I tried pressing the reset, preload and clear buttons, but only the reset seems to do anything. The LCD screen flashes, but the same message keeps coming up. Has anyone encountered this? Any suggestions?
-
-
Have you checked the 'play' button for being stuck? Might take the remote apart and see if anyone has spilled something on it messing up that button.
Kevin D. -
I thought about that, but I can't see how to take the remote apart.Comment
-
Take the bottom sliding cover and pull it down fast. It should pop off and reveal two screws. Sould be able to unscrew those and pop the top of the remote off.
Kevin D.Comment
-
Thanks, are there any other hidden screws. I took off the two screws, but the top still seems to be secured a little further up. I have tried a lot of brute force but don't want to break the top.
ThanksComment
-
Never actually tried to take it apart! I'll take a look here in a second.
Kevin D.Comment
-
Ok.. I give up.. I had always assumed it should snap off once the screws were out. You should be able to get Rotel to exchange it.
Kevin D.Comment
-
Funny, but all that attempted prying to separate the back and front of the remote has somehow fixed the problem.
Thanks!Comment
-
Heh.. Unexpected, but pleasantly surprised!
Kevin D.Comment
-
Is there a way to do this on the 1066 with a RR1050 remote? I can't find it for the life of me. Also, isn't the 1050 supposed to have a little flip panel under the slider?
THANKS! -
I just acquired a Classe ssp-600 processor. It came with the remote but the only function it performs on the ssp-600 is vol up, down and mute. I can also program the f1, f2, f3, f4 keys from the on screen menu. The other commands on the remote don't seem to be working, including the standby, display,... -
Just yesterday my RR-1050 remote for my RSP-1068 started acting up.
When editing a label for a function on the remote, various characters on the remote display will cause other items to appear faintly (like the learn and edit icons) or faint lines through the main characters to appear... -
Hi guys,
Just a quick ask before I box it all up and ship it back, to see if this has happened to anyone else before.
My RSP-1098 has been working fine out of the box. It's only a few months old (maybe 4 at most), so is onlt just about run in....
I only sit... -
I recently got a hand-me-down RSX-1057 from my father along with an RR-1060 remote but I am unable to control the RSX-1057 with the RR-1060. Both units were unused (and unpowered) for a couple of years before I started playing with them yesterday.
Before anyone posts it, yes I have...07 March 2020, 11:48 Saturday
Comment