Is there any advantage in connecting satelite receiver and DVD through Rotel RSP-1066 instead to connecting directly to TV?
Thanks
Thanks
-
-
The school of thought for this is if you have enough video connections on your television to cover your equipment (DVD, Sat, etc.), then you should connect it directly to your tv, it may provide better reception than running it through your 1066.
I run all my equipment through my 1098, because I utilize a projector, and there are simply no inputs provided, others do it for the convenience.
The best judge of this would be you, do a simple experiment and find what suits your taste.
Let us know how it works out for you.
Regards,
Azeke -
In theory at least, every connection has the possibility of degradation. So, the fewer the better from a purist standpoint. In reality, if a component (pre-pro) or receiver has "broadcast quality" video on board, there should be no real degredation as a result of the additional connection. The convenience of it is what makes most people tend to running through a pre-pro,plus as Azeke pointed out, those of us with projectors have little option besides using processor switching.
I don't know as to the quality of Rotel video, but I imagine if it will do HD, it should be just fine.
LexDoug
"I'm out there Jerry, and I'm loving every minute of it!" - KramerComment
-
Thanks guysComment
-
After having spent most of the past few weeks browsing the board and learning quite a bit, I have struck a problem and wondered if anyone had any ideas to assist?
I have connected up my PC to the Video 5 / Coaxial 1 inputs and whilst sound works fine, the quality of the image is absolutely... -
Dear Rotel enthousiasts,
Yesterday I bought a Pioneer plasma screen to complete my Rotel setup
After concluding all the (required) connections I found out that there's a problem displaying (progressive or not) an 1060 image on the Plasma screen.
I really hope... -
I finally got my 1057 after 2 monts wait...
but I can't use it
Can someone please give me specific button to button instructions to first set the output to HDMI and turn the component =yes feature "the manual says thats the only way I can get the OSD on the screen... -
My setup is as follows.
rotel rsx 1055 reciever
rotel rdv 1080 dvd player
sony 46 inch lcd moniter.
My problem is simple, im a a/v newbe and have searched the forum for the answer, i havent found what im looking for. So here it goes
I have component... -
Hi guys,
I just replaced my Denon 3802 with a Rotel 1066 yesterday, hooked up to a Rotel 1075 amp. I haven't had much of a chance to listen to it yet but so far it sounds awesome.
I have a problem with my video connections though. I had no problems with the Denon 3802 so...
Comment